Setting Wol - NEC Express5800 User Manual

5-26 Installing the Operating System with Express Setup
Remove Team
1.
Open the [Device Manager].
2.
Click [Network adapters], and open [TEAM: "Team name"] properties.
3.
Click [Setting] tab.
4.
Click [Remove Team] button.
5.
Click [Yes] to the message.
6.
Confirm [TEAM: "Team name"] adapter in not existing in [Network adapters] tree and
reboot the system.

Setting WOL

Refer to the following procedure to enable WOL.
1.
Start Device Manager.
2.
Point to [Network adapters] and double click [Intel(R) 82547L Gigabit Network
Connection] to open the adapter [Properties].
3.
Click [Power Management] tab and change setting in [Wake On LAN] according to the
following list.
Setting item
"Wake On Magic Packet"
"Wake on Magic Packet from power off state"
"Wake on Link"
"Wake on Pattern Match "
NOTES:
[Power Saver Options] setting is not necessary to change.
Above setting will be maintained until manually resetting are
executed.
IMPORTANT: The parameters of [Wake On LAN] will not exist, if
the network ports are not available for WOL.
4.
Click [OK].
5.
Restart the system.
Change setting
ON
ON
OFF
OFF