Reset Hvac Equipment Settings; Performing A Hardware Reset; Rebooting The Smart Si Thermostat - Ecobee Smart Si Installation Manual

Reset HVAC Equipment Settings

You can quickly restore all HVAC equipment
settings on the Smart Si thermostat back to their
factory defaults. Any user setting (not related to
the equipment installed) will remain unchanged.
If you need to reset the entire thermostat back
to its original factory default settings, including
user settings and registration, select
Settings
instead.

Performing a Hardware Reset

In rare circumstances, static electricity or power
surges may interrupt the operation of the
thermostat, forcing a hardware reset.
Rebooting the Smart Si
Thermostat
You can reboot the Smart Si thermostat by
pressing the physical hardware reset button,
located through an opening in the bottom left
corner of the Smart Si thermostat. Rebooting
will not alter programming or configuration
options.
To reset the Smart Si
thermostat:
From the Home screen,
press MENU.
Select
Select
Reset All
Settings.
Select Yes.
Reset button
Settings ▶ Reset.
HVAC Equipment
29