Reset Hvac Equipment Settings; Performing A Hardware Reset - Ecobee EMS Si Manual

Test Equipment
These options let you test the wiring and
connections of the devices connected to the
thermostat by turning them on or off.
The equipment will turn off when you exit the
menu.
Warning: Compressor protection and
!
minimum run-time features are not
enforced while in this mode.

Reset HVAC Equipment Settings

You can quickly restore all HVAC equipment
settings on the EMS Si back to their factory
defaults. Any user setting (not related to the
equipment installed) will remain unchanged.
If you need to reset the entire thermostat back
to its original factory default settings, including
user settings and registration, select
Settings instead.

Performing a Hardware Reset

In rare circumstances, static electricity or power
surges may interrupt the operation of the
thermostat, forcing a hardware reset.
To test the equipment:
From the Home screen,
press MENU.
Select
Installation
Select
Select OK.
Test the equipment
connected to the
thermostat by turning each
component on and off.
To reset the EMS Si:
From the Home screen,
press MENU.
Select
Select
Settings.
Reset All
Select Yes.
Settings ▶
Settings.
Test Equipment.
Settings ▶ Reset.
HVAC Equipment
29