Table of Contents
Advertisement
Display
Overview
"SMS Inbox"
Display the received short message.
Refer to
<Display the SMS> (page
"BT Settings"
"Pairing"
"Device
Register a Bluetooth device (pairing).
Registration"
Refer to
<Registering Bluetooth Device
(Pairing)> (page
"Phone
Select a cell-phone or Bluetooth audio player
Selection"
connection.
Refer to
<Selecting the Bluetooth Device You
"Audio
Wish to Connect> (page
Selection"*
1
"Special Device
Register a Bluetooth device (pairing).
Select"
Refer to
<Registering Bluetooth Device
(Pairing)> (page
"Device Delete" Cancel registration of the Bluetooth device.
Refer to
<Deleting a Registered Bluetooth
Device> (page
"SMS Download"
Download a short message.
Refer to
<Downloading the SMS> (page
"Voice Tag"
Registers voice for voice recognition and voice
to select the Phone number category in Phone
book.
- Adding a Voice Dialing Command (page 59)
- Setting a Voice Command for Category (page
60)
"Detailed Setup"
Move to detailed item.
"PIN Code Edit" Specify the PIN code required when registering
this unit using the Bluetooth device.
Refer to
<Registering PIN Code> (page
"Auto Answer" Answer a call automatically after lapse of the
preset time interval for automatic answer.
"OFF"/ "0s" – "8s" – "99s"
"Auto
Automatically reconnects the selected
Reconnect"*
Bluetooth device when radio wave becomes
2
strong enough, even after it is disconnected.
"ON"/ "OFF"
✍ When this function is enabled, the
Bluetooth device is reconnected even if
"Phone Selection" is selected to select
a cell-phone connection. To cancel the
Bluetooth connection, select OFF to disable
this function.
"Bluetooth
You can specify output speakers for hands-free
HF"*
voice communication and Bluetooth audio
2
"Bluetooth HF/
sound.
"Front": Outputs voice from the front speakers.
Audio"*
1
"All": Outputs voice from the front and rear
speakers.
"Call Beep"
You can output a beep from the speaker when
a call comes in.
"ON": Beep is heard.
"OFF": Beep is canceled.
"BT F/W Update" Display the version of the firmware of this unit.
61).
56).
57).
56).
58).
61).
57).
"Mic Gain"*
Adjust the sensitivity of the microphone for a
3
telephone call. Adjust the voice of caller. Setting
to "+" increases the voice volume.
"–3" – "0" – "+3"
"Noise
Reduce the noises generated by surrounding
Reduction"*
environment without changing the microphone
3
volume. Adjust the voice of caller when it is
not clear. Setting to "+" increases the noise
reduction.
"–3" – "0" – "+3"
"Echo Cancel
Adjust the level of echo cancellation. Setting to
Level"*
"+" increases the echo cancel reduction.
3
"–2" – "0" – "+2"
*
Function of KIV-701 with KCA-BT300/BT200 (Optional
1
Accessory)
*
Function of KIV-BT901
2
*
Function of KIV-BT901/ KIV-701 with KCA-BT300
3
(Optional Accessory)
4
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
5
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
6
Exit Bluetooth mode
KIV-BT901: Press the [
KIV-701:
Press the [iPod] button for at least 1
second.
Remarks
• "Auto Answer" (Setting the Time Interval for Automatic
Answer)
This function automatically answers (responds to) a call
after lapse of the preset time interval for automatic answer.
"OFF" : Does not answer the phone call automatically.
"0" : Automatically answers the phone call at once.
"1s" – "99s" : Automatically answers the phone call after
lapse of 1 – 99 seconds.
⁄
• If the time set in the cell-phone is shorter than that set in
the unit, the former will be used.
• This function does not work for call waiting.
• "BT F/W Update" (Displaying the Firmware Version)
Display the version of the firmware of this unit.
For how to update the firmware, access our web site.
http://www.kenwood.com/cs/ce/bt/
(
: Factory setting)
] button.
55
|
English
Hide quick links:
Advertisement
Chapters
Table of Contents
