Operation Of Hands-Free Phoning; Getting Started - Kenwood KIV-BT901 Instruction Manual

Function of KIV-BT901
KIV-701 with KCA-BT300/BT200 (Optional Accessory)

Operation of Hands-Free Phoning

SRC MENU Volume
4
38 ¢

Getting Started

Before use the cell-phone, you need to connect cell-
phone to this unit.
⁄
• For details on the Bluetooth cell-phone with the hands-
free function, see <About the Cell-Phone> (page
KIV-BT901
1
Enter easy pairing mode
Press the [ ] button for at least 1 second.
2
"Searching" is displayed.
Search for the Bluetooth device.
When search is completed, "Finished" is displayed.
3
Select a cell-phone name
Turn the [Volume] knob and press it when the
desired item is displayed.
4
Input the PIN code
1. Turn the [Volume] knob and press it when
the desired item is displayed.
Select the digit.
2. Turn the [Volume] knob to select the
numbers, and then press the [Volume] knob.
5
Transmit the PIN code
Press the [Volume] knob for at least 1 second.
If "Pairing Success" is displayed, registration is
completed.
When "Confirm Phone" is displayed, confirm
connection with a cell-phone operation.
6
The receiver is connected to a cell-phone, with
"HF Connect" displayed, and exits the easy
pairing mode.
⁄
• For more details, see <Easy pairing function> (page
32
|
KIV-BT901/ KIV-701
DISP
KIV-BT901
iPod
KIV-701
72).
54).
KIV-701
The following 3 steps procedure is necessary.
Step 1. Pairing (Registering from Bluetooth
devices)
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing).
1
Turn on this unit
Press the [SRC] button.
2
Start registering this unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
hands-free unit (pairing). Select "KCA-BT300"/ "KCA-
BT200" from the list of connected units.
3
Enter a PIN code
Input the PIN code ("0000") in the Bluetooth
device.
Check that registration is complete on the
Bluetooth device.
✍ PIN code is set to "0000" as the default. You can
change this code. Refer to
Code> (page 57).
4
By operating the Bluetooth device, start hands-
free connection.
Step 2. Connection
If you have registered 2 or more cell-phones, you
need to select one of them. For more details, see
<Selecting the Bluetooth Device You Wish to
Connect> (page 57).
When a cell-phone is connected, the "BT" indicator
is light up.
Step 3. Hands-free phoning
You can do hand-free phoning when the
connection is made.
⁄
• When registering from this unit, refer to
Bluetooth Device (Pairing)> (page
<Registering PIN
<Registering
56).