Direct Music Search; Skip Search; Usb Setting - Kenwood KIV-BT901 Instruction Manual

Function of remote control

Direct Music Search

Searching the music by entering the file number.
1
Enter Direct Music Search mode
Press the [DIRECT] button on the remote
control.
2
Enter the music number
Press the number buttons on the remote
control.
3
Search the music
Press the [4] or [¢] button.
Cancelling Direct Music Search
Press the [DIRECT] button.
⁄
• Direct Music Search cannot be performed during playing of
Zune/ "Music Editor" media, Random play, or scan play.

USB Setting

You can select following USB Setting items.
1
Select USB source
2
Enter Menu List mode
Press the [MENU] button.
3
Turn the [Volume] knob and press it when the
desired item is displayed.
Select "Settings".
4
Select the setting item
Turn the [Volume] knob and press it when the
desired item is displayed.
Display Overview
"Settings"

"Skip Search"*

1 Sets the ratio of skip performed with
Search> (page
"0.5%"/ "1%"/ "5%"/ "10%"
"Device F/W Display the version of the firmware of this unit.
Version"
"Device F/W Updates the firmware. The update information
Update" will be posted on the following URL as necessary.
www.kenwood.com/cs/ce/
* Selectable when Music Editor media or Zune is used.
1
5
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• The setting of "Skip Search" in
and that in <USB Setting> (page 19)
Changing the setting of one reflects the other.
<Skip
18).
( : Factory setting)
<iPod Setting> (page 8)
are always the same.
19
|
English