Mitsubishi Electric AG-150A Instruction Book page 79

8-2-3 Setting of lower/upper limit temperature
After setting the time period, lower/upper limit temperature for each group can be set.
Touch lower/upper limit temperature setting button to show the screen below.
Set the temperature by pressing
control will not be operated. After setting, press OK to reflect the
setting. Setback setting screen will be shown. If the temperature is not
changed, touch [Cancel].
Note: The setting : lower limit temperature < upper limit temperature
Note: The settable temperature varies depending on the model.
Note: When CITY MULTI S Series (PUMY) is used, set the
temperature at 17°C/63°F or above in heating mode.
After setback setting screen is shown, check the changed items.
Touch [Save settings] button to reflect the changes immediately.
– 78 –
Lower/Upper limit
temperature setting
button
button. When [--] is set, setback