(13) Make the settings for the block and group names.
(14) Make the settings for the floor layout.
(15) Set the clock.
(16) Set the Master/Sub clock setting to "Master."
(13) Make the settings for the block and group names.
The settings for the 2nd and subsequent units do not need to
be the same as the settings for the Master unit.
(14) Make the settings for the floor layout.
The settings for the 2nd and subsequent units do not need to
be the same as the settings for the Master unit.
(15) Set the clock.
(16) Set the Master/Sub clock setting to "Sub."
– 21 –