STANDARD TELEPHONE
To Record a Forced, or a Forced
and Verifiable Account Code
(Direct Trunk Access or Least
Cost Routing):
1. Access a CO line (by dialing
the DTA or LCR access code).
2. Dial the distant directory
number.
3. Dial the 1- ~ 12-digit account
code (determined in the
DMDR Program).
To Record a Verifiable Account
Code Before Dialing a Call:
1. Lift the handset.
2. Dial the CRG access code.
3. Dial the 1- ~ 12-digit account
code (determined in the
DMDR Program).
4 Dial the direct trunk access
code and the desired
telephone number.
18
MISCELLANEOUS FEATURES
ACCOUNT CODE CALLS
For accurate billing purposes, you may be required (forced) to dial an
account code before making outside calls. On other calls, you may wish
to record an account number voluntarily after either dialing an outside
number, or receiving an incoming call. The code you enter will be
recorded on the Station Message Detail Recording (SMDR) printout with
the details of your call. The Account Code Length (ACL) must be entered
in the Station Message Detail Recording Data Block (DMDR) program.
This feature will not operate without it.
You will hear dial tone.
You will hear recall dial tone.
The account code is saved to output to the SMDR. The system stores
the dialed directory number to auto-dial queue, and the trunk call is
made.
NOTE: The Forced/Verifiable Account Code can be applicable to either
all calls or toll calls only (Programming Option).
You will hear dial tone.
You will hear dial tone.
The trunk call is made.
PERCEPTION
e&ex