Chapter 5 Setup
5.4 Server Connection Setup
5.3.2
Connection Setup for the ETERNUS DX Disk Storage System and Power
Synchronized Units
Refer to "User's Guide -Power Synchronized Unit-" that is provided with the power synchronized unit for the
required settings to use power control by connecting power synchronized units to an ETERNUS DX Disk storage
system.
5.4
Server Connection Setup
Perform the settings required to connect to the server and install the required drivers. Perform the settings
required for network devices connecting the server and the ETERNUS DX Disk storage system.
After the server connection setup, confirm that the volumes in the ETERNUS DX Disk storage system can be
recognized by the server.
For details on the server connection setup, refer to the following documents:
•
ETERNUS Web GUI User's Guide
•
ETERNUS CLI User's Guide
•
User's Guide -Server Connection-
•
Manuals of the drivers to be installed
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
142
Copyright 2013 FUJITSU LIMITED
P3AM-4832-07ENZ0