P-Ttl Auto Flash - Samsung SEF-36PZF User Manual

P-TTL AUTO FLASH

❷
❸
❹
❹
❷
A pre-flash is fired before the main flash so that the
multi-segment metering sensor can measure the
subject's distance, brightness, backlit condition, etc.
The data obtained is incorporated to set the output
of the main flash. This mode obtains more accurate
results than with the conventional TTL mode.
■ Procedure
1
Turn on the camera.
2
Turn on the flash unit and select the P-TTL
mode.
3
Set the sync mode switch to the leading
shutter- curtain sync [
• After turning the power [ON], the setting will
be [P-TTL] and [A.Zoom].
].
《21》