MOUNTING TO CAMERA
1
1
Remove the hot shoe cover from the camera.
2
Slide the shoe bracket into the camera's hot
shoe and then turn the locking lever in the
direction of the arrow to secure it in place. To
remove it, loosen the locking lever and slide it
off the camera.
• When the flash unit is attached to the GX and
the locking lever is turned toward [FIX
lock it, the locking pin will be extended for
secure locking.
2
• Turn the locking lever in the opposite direction
indicated by [FIX → ] before sliding the shoe
bracket into the camera's hot shoe.
→ ] to
《15》