Samsung SMARTSERVER 370 User Manual page 59

The following illustration shows a modem connected to the management port of the
Remote Supervisor Adapter in the Sma rtServer 370 on the left, a modem
connected to the management port of the Remote Supervisor Adapter in the
SmartServer 370 on the right, and a modem connected to the remote administrator
system. Placing modems at opposite ends of the ASM interconnect network bus
ensures that if an ASM interconnect connection in the bus fails, all of the servers
on the ASM interconnect network have access to a modem to forward
system-management data to the remote system-management administrator.
Modem
Note: A Remote
SmartServer 370
Supervisor Adapter is
required in each server.
Note: The ASM Interconnect module is connected to the RS485 port on the
back panel of the Remote Supervisor Adapter in each server.
Figure 10. Connecting modems to the ASM Interconnect network
Remote system
management
administrator system
Modem
SmartServer 370
Modem
SmartServer 370
ASM
Interconnect
modules
Chapter 2. Configuring the server
49