Using The Documentation; Cabling And Configuring The Remote Supervisor Adapter - Samsung SMARTSERVER 370 User Manual

Using the documentation

Cabling and configuring the Remote Supervisor Adapter

v Install the operating system on the server, using ServerGuide and the
documentation that comes with the operating system.
v Install the agent component of UM Server Extensions to use the following
Advanced System Management (ASM) Web interface features:
– Shutdown O/S and then Power Off Server
– Shutdown O/S and then Restart Server
UM Server Extensions is on the system-management software CD that comes
with the server. For information about installing the agent component, see the
documentation that comes with the system-management CD.
v To configure the remote alert recipients for IBM Director over LAN or IBM Director
over modem, the remote alert recipient must be an IBM Director-enabled server
with UM Server Extensions.
v If you want to use a Web browser to access the Remote Supervisor Adapter
remotely, the following software is required:
– Microsoft Internet Explorer 4.0 (with Service Pack 1), or later
– Netscape Navigator 4.72, or later (version 6.0 is not currently supported)
™
– Java enabled Web browser (See your browser documentation or online Help
for instructions about enabling its Java support.)
– Support for JavaScript
online Help for instructions about enabling its JavaScript support.)
– Support of HTTP version 1.0, or later
– Minimum display resolution of 800 x 600 pixels and 256 colors
Note: The ASM Web interface and the ASM text-based interface do not support
the double-byte character set (DBCS) languages.
The documentation for the Remote Supervisor Adapter includes the following
publications on the Documentation CD.
v SmartServer 370 User's Guide (this document, specifically the topics in this
section, which assist you with the cabling and configuring).
v Remote Supervisor Adapter User's Guide
This document explains how to configure and use an ASM network to manage
the server remotely through either the Web-based interface or the text-based
user interface.
Complete the following tasks to cable and configure the Remote Supervisor
Adapter.
Note: After you initially configure the adapter, use the Web-based interface to
create a backup copy of the configuration. If you need to replace the adapter
in the future, you can restore the configuration and resume normal operation
more quickly. See the Remote Supervisor Adapter User's Guide, on the
Documentation CD for details.
Task 1.
Connect the Ethernet and management port cables. See "Cabling the
Ethernet LAN port and management port" on page 34.
™
1.2, or later (See your browser documentation or
Chapter 2. Configuring the server
33