Table of Contents
Advertisement
22
User's Guide
v Load Default Settings
Select this choice to cancel the changes you have made in the settings and
restore the factory settings.
v Exit Setup
Select this choice to exit from the Configuration/Setup Utility program. If you have
not saved the changes you have made in the settings, you are asked whether
you want to save the changes or exit without saving them.
Additional Configuration/Setup Utility menu choices
With the IBM Remote Supervisor Adapter in your server, you can view the following
additional menu choices:
v System Card Data
Select this choice to display information about your server.
v PCI Slot/Device Information
Select this choice to view the properties of adapters installed in PCI slots.
v Administrator Password
Select this choice to set or change the administrator password.
v Remote Control Security Settings
Select this choice to set a remote-control password. When you set a
remote-control password, you can also set the number of times the wrong
remote-control password can be entered before the user is locked out of the
server, and the duration before another attempt is allowed.
v RSA I Settings
Select this choice to view the MAC address, IP address, subnet mask address,
and gateway information and to set the DHSP control.
For a list of supported options for your server, go to
http://www.sec.co.kr/server/. To order an option, contact your SAMSUNG marketing
representative or authorized reseller.
Advertisement
Table of Contents
