July 2003
GUIDE TO
FEATURE
PROGRAMMING
Order
and
Shortcut
¶
Card Interface Slot Assignment
+BS
¶
Voice Mail/SLT Selection
+BTI
¶
Station Number Assignment
+BS
¶
Intercom Master Hunt Number Selection
+BTT
¶
Intercom Master Hunt Number Forward
+BTT
Assignment
¶
Station Name Assignment
+BTT
¶
DIT Assignment
+BCT
¶
ANA Assignment
+BCT
When the system is at default this Memory Block must be programmed for the feature to be used.
414 – M3
Restrictions
The supervisor must perform the Setting Procedures before the
conference Bridge can be used.
Up to 16 analogue voicemail ports are available. The CNF(8)-U( )
ETU reduces this number by 8.
Each CNF(8)-U( ) ETU reduces the number of stations and CAR
keys by 8.
It is the characteristic of the network that audio losses of up to 6dB
may be experienced over analogue PSTN services, depending on the
length of the line back to the local exchange. When analogue lines are
incorporated into a conference, the end to end loss can therefore add
up to 12dB. This loss is significant and may not be able to be
compensated for by the Automatic Gain Control (AGC) facility of the
Xen IPK conference card, resulting in some conversations being low in
volume. Such losses should not be experienced when using ISDN
lines. Therefore, in order to ensure audio levels are maintained at
acceptable levels, NEC recommend to use ISDN lines where possible,
for all conference parties.
System Data Name
NEC Business Solutions Ltd
Memory
Function
Block
7-1
4-35
4-10
4-14
4-15
4-18
3-42
3-43
1-8-07
1-8-08
Attendant
Station
Page-Line
Page-Line
Key
Key
Multiline Conference Bridge