Direct Paging Access - NEC Xen IPK Features & Specifications Manual

Direct Paging Access

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The Attendant Add-On Console Direct Station Selection/Busy Lamp Field
(DSS/BLF) keys allow direct access to each of the Internal, External, and All
Call Paging. The programmable Feature Access and One-Touch keys on
the Multiline Terminals can also be used for Direct Paging Access.
Terminal Type
All Multiline Terminals and Attendant Add-On Consoles .
Required Components
ECR-U( ) ETU for External Zone Paging.
To use this feature from a Multiline Terminal with a Feature Access
or a One-Touch key programmed for Direct Paging Access or with
the Attendant Add-On Console assigned:
1. Go off-hook.
2. Press the Direct Paging Access key.
3. Make the paging announcement.
Data Assignment
All Attendant Add-On Consoles have eight Direct Paging Access keys.
All are set in default as shown:
1.
Internal Zone A
2.
Internal Zone B
3.
Internal Zone C
4.
All Internal Zone
Internal Zones A, B, and C are not active until zone assignments
are made.
D-11
DSS
Key
50 5.
External Zone A
51 6.
External Zone B
52 7.
External Zone C
53 8.
All External Zone
DSS
Key
56
57
58
59
D11 – 271