Troubleshooting - Omega Altise OAPC10 User Manual

Seasonal Cleaning
If the machine is not be unused for a long time, please follow these steps :
• Pull out drainage plug upper / lower to empty any water out.
• Let the machine run under fan mode for 2 hours to dry out the machine internals
• Turn off the appliance, switch off the power point and remove the plug.
• Clean and dry filters , then reinstall them .
• Pull out exhaust pipe for safekeeping .
• Put the machine into a plastic bag , and place it on a dry place.
Please contact professional serviceman without delay in following situation
Trouble
Power off
"P2" flashes on screen or
Machine
water-full indicator turns on
cannot work
Timer-off turns on
Direct sunlight
Door and windows are open ,
Machine auto- many heat sources in the
restarts room .
frequently
Filters are too dirty.
Air-inlet or air out-let is
blocked
Too noisy Machine is not on flat ground.
Compressor Compressor time-delay
cannot work protection turns on
Note: If the machine is not working please contact your authorised agent.

Troubleshooting

Cause Solution
Power on
Drain water out
Turn off machine for three minutes,
then restart it.
Draw the curtains
Close the door and windows, move
out heat sources.
Clean or replace filters
Remove blockage
Place it on flat and solid ground,
avoiding shaking
Wait for 3 minutes, then restart the
machine after temperature reduces .