Related Manuals for Omega Altise OAPC10
Summary of Contents for Omega Altise OAPC10
-
Page 1: Important Safeguards
USER’S MANUAL PORTABLE AIR CONDITIONER TECHNICAL SPECIFICATION OAPC10 MODEL : Voltage : 220-240V~ 50Hz Power consumption: 890W IMPORTANT SAFEGUARDS... - Page 2 • Young children should be supervised to ensure that they do not play with the appliance • If the power cord is damaged it must be performed by an authorised agent of Omega Altise SAFETY RULES To prevent injury to the user or other people and to prevent property damage, the following instructions must be followed.
-
Page 3: Placement And Installation
• If the supply cord is damages it must be repaired by a qualified repairer • Keep the are clear around the appliance. There needs to be a air path of at least 30cm all around the unit from walls, furniture and curtains. •... - Page 4 Place the machine on flat and dry ground, and keep at least 30 cm from walls etc (figure 1) FIGURE 1 Installation • Spin adapter into exhaust pipe first, then spin the exhaust pipe into exhaust connector (counter-clockwise) (figure 2) •...
-
Page 5: Parts List
FIGURE 3 FIGURE 4 Warning Use only the exhaust pipe supplied. Longer or extended pipes may damage the appliance Note: extreme length of unfolding exhaust pipe is 1500mm, please shorten the length as much as possible and keep it level as much as possible when installing Parts List Front side (figure 5) -
Page 6: Control Panel
FIGURE 7 1. Exhaust Pipe 2. Adapter 3. Remote control 4. Sealplate Control Panel 17 18 1. ON/OFF (power) button 11. High ventilation indicator 2. Mode (function) button 12. Low ventilation indicator 3. Sleep function button 13. Timer operation indicator 4. - Page 7 cooling, dehumidifying and fan mode. 3. FAN: after machine turns on, press this key to select fan speed (high and low). 4. DOWN: under cooling mode, press this key to downward setting temperature from 16~31℃; under timer mode, press this key to downward on/off time. 5.
-
Page 8: Remote Control
Remote Control 1. Power 2. Timer 3. Down 4. Mode 5. Up 6. Fan 7. Sleep Operation Methods Cooling mode • After machine turns on, default value is cooling mode with 22 and low fan speed. • Press “ MODE” to select cooling mode, cooling mode indictor turns on . •... -
Page 9: Water Drainage
Timer mode • Under standby mode, press “TIMER” to setup the power-on time, press “UP” and “DOWN” to adjust the timer (from 1 to 24). Timer indicator turns on. • Under power-on mode, press “TIMER” to setup power-off timer. Press “UP” and “DOWN”... -
Page 10: Maintenance
• If inner water tank is full, “W.F” indicator will flashed on the screen , 8 seconds later machine enter into standby mode, buzzer shouts , compressor stops and all keys is invalid till machine recovers to be normal . •... -
Page 11: Troubleshooting
Seasonal Cleaning If the machine is not be unused for a long time, please follow these steps : • Pull out drainage plug upper / lower to empty any water out. • Let the machine run under fan mode for 2 hours to dry out the machine internals •... -
Page 12: Technical Data
Technical Data Model OAPC10 Cooling capacity BTU/h 10000 Mains 220-240V/50Hz/1Ph Power consumption Current 3.95 Dehumidification L/24h Refrigerant R410A Compressor Rotary Fan speeds Thermostat 16-31 Timer 0-24 Dimensions(W*H*D) 320 X 730 X 360 Net weight...
Need help?
Do you have a question about the OAPC10 and is the answer not in the manual?
Questions and answers