Related Manuals for NAD C 516BEE
Summary of Contents for NAD C 516BEE
- Page 1 C 516BEE ® Compact Disc Player Owner’s Manual Manuel d’Installation Manual del Usuario Manuale delle Istruzioni Bedienungsanleitung Gebruikershandleiding Bruksanvisning Инструкция по эксплуатации...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS FOR LATER USE. NOTE TO CATV SYSTEM INSTALLER FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE AUDIO This reminder is provided to call the CATV system installer’ s attention to Section 820-40 of EQUIPMENT. the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. - Page 3 Electronics for compliance could void the user’s authority to operate this equipment. CAUTION The C 516BEE employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Should the unit CAUTION REGARDING PLACEMENT require maintenance, contact an authorized service location.
- Page 4 RECORD YOUR MODEL NUMBER (NOW, WHILE YOU CAN SEE IT) The model and serial number of your new C 516BEE are located on the back of the cabinet. For your future convenience, we suggest that you record these numbers here: Model no.
-
Page 5: Table Of Contents
We encourage you to take a few minutes now to read right through this USING THE C 516BEE - FEATURES ....... . 10 manual. -
Page 6: Introduction
If the C 516BEE is placed in close proximity to a radio tuner (AM or FM), a VCR or a television set, the operation of its digital circuits may produce static that would interfere with reception of weak broadcast signals. -
Page 7: Identification Of Controls
[PLAY] or [PAUSE] again. 8 STOP: Press the [STOP] button once to stop playback and re-set the If the disc tray is open and the C 516BEE is powered OFF, the disc tray will draw close and the unit powered OFF. -
Page 8: Rear Panel
©NAD C 516BEE ATTENTION! Please make sure that the C 516BEE is powered off or unplugged before making any connections. It is also advisable to power-down or unplug all associated components while making or breaking any signal or AC power connections. -
Page 9: Cd 7 Remote Control
IDENTIFICATION OF CONTROLS CD 7 REMOTE CONTROL 1 ON : Switches CD Player ON. 2 OFF : Switches CD player OFF. 3 RANDOM : Play tracks in random mode. REPEAT : Repeat track, file or whole disc. RPT A-B : Repeat sequence. 4 PROGRAM : Enter or exit program mode. -
Page 10: Operation
When programming a sequence of tracks, the press SKIP to jump over the programmed tracks that you don’t want to C 516BEE must be in STOP mode. Using the CD 7 remote control, enter your hear. -
Page 11: Using The C 516Bee - Cd 7 Remote Control
Elapsed time of the ✔ current file Using the direct-entry numeric keypad (0 to 9) causes the C 516BEE to jump directly to the beginning of a numbered track and commence play. Thus, to Remaining time of the current file ✔... -
Page 12: Reference
• Turn on the equipment connected with the the audio cable is turned off. audio cable. Sound skips. • The C 516BEE is subject to vibration or physical • Change the installation location. shock from external sources. The remote control does not work properly. -
Page 13: Specifications
Shipping weight 4.5 kg (9.9 lbs) * - Gross dimensions include feet, extended buttons and rear panel terminals. Specifications are subject to change without notice. For updated documentation and features, check out www.NADelectronics.com for the latest information about C 516BEE. - Page 14 All rights reserved. NAD and the NAD logo are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International.