System Menu Screen - JVC BD-X200E Instructions Manual

Setup Menu

SYSTEM MENU Screen

The following table identifies and describes the parameters that may be set using the SYSTEM MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
Parameter Possible settings
TEST SIGNAL
TEST S
FACTORY
SETTING
FACTRY
KEYBOARD
STYLE
KBOARD
EDIT MENU
EDIT
TOTAL RECORDING TIME
—
MENU
E-78
This parameter is used to indicate whether or not the colour bar output by the DVD
[OFF]
recorder's internal signal generator is to be displayed.
ON
OFF : The colour bar is not displayed and video from the VIDEO LINE IN terminal
ON : The colour bar is displayed. Use this setting when the colour bar is to be
[OFF]
ON
This parameter is used to indicate whether or not all setup menu parameters are to
[CANCEL]
be returned to their default settings.
EXECUTE
CANCEL
EXECUTE : Default settings are to be restored.
[CAN]
EXE
This parameter is set when using a USB keyboard, and its purpose is to indicate the
[ENGLISH]
keyboard's layout (or language) as one of the following.
FRENCH
ENGLISH
ITALIAN
FRENCH
GERMAN
ITALIAN
SPANISH
GERMAN
JAPANESE
SPANISH
JAPANESE
[ENG]
Note
FRN
ITL The system must be restarted after this parameter is changed.
GER
ESP
JPN
[ENABLE] This parameter is used to indicate whether or not a screen for editing the title and
DISABLE
chapter menus is to be displayed when title closing or finalizing is performed.
ENABLE : The menu editing screen is to be displayed.
[ON]
OFF
DISABLE : The menu editing screen is not to be displayed.
—
This button displays the total time for recording and erasing operations. (xHour xxMin)
—
This button is used to retu4rn to the Setup Menu screen.
is output to the monitor.
recorded.
: Default settings are not to be restored.
Upon title closing, the THUMBNAIL EDIT screen will be displayed for
the corresponding chapter menu. (☞ Page 47)
Upon finalizing, the TITLE MENU EDIT screen will be displayed for the
title menu. (☞ Page 53)
Description