Safety Equipment; Chain Brake; Dismantling - Husqvarna 36 Workshop Manual

Chain brake

Dismantling

Dismantle the clutch cover and clean. See
the operating instructions.
Slide the hand guard forwards so that the
brake is actuated.
Loosen the screw on the hand guard and
screw back 2 turns.
Gently hit the screw so that the threaded part
of the bushing can be removed.
Dismantle the other part of the bushing by
means of a punch.
Remove the cylindrical pin A.
All saws except 3120
Remove the cover on the chain brake spring.
The cover has 4 or 5 screws.
!
WARNING!
If the brake is not 'on', the spring
can fly out resulting in personal
injury.
Wear protective glasses!
Continues on next page.
42
– English

SAFETY EQUIPMENT

3120
!
WARNING!
If the clutch cover slides out of
the vice's grip the spring can fly
out with immense force resulting
in personal injury!
Wear protective glasses!
Place the clutch cover in a vice with the jaws
positioned as shown below and release the
tubular pin B.
Carefully knock out the tubular pin B.
B
3120 continues on next page.
A