Couplers And Leads Connection - Inspection; Multi-Function Display Input Voltage Inspection; Multi-Function Display Output Voltage Inspection - Yamaha WR450F(W) Owner's Service Manual

Wr series
Table of Contents

Advertisement

SIGNALING SYSTEM
COUPLERS AND LEADS CONNECTION
INSPECTION
1. Check:
• Couplers and leads connection
Rust/dust/looseness/short-circuit →
Repair or replace.
MULTI-FUNCTION DISPLAY INPUT
VOLTAGE INSPECTION
1. Disconnect the multi-function display cou-
pler.
2. Set the main switch to "ON".
3. Measure:
• Multi-function display input voltage
Out of specification → Replace wire har-
ness.
Tester (+) lead → Brown lead 1
Tester (–) lead → Black lead 2
Multi-function dis-
play input voltage
10 V or more
CAUTION:
Make sure that a short-circuit does not
develop between the terminals because it
may cause damage to electrical compo-
nents.
MULTI-FUNCTION DISPLAY OUTPUT
VOLTAGE INSPECTION
1. Disconnect the multi-function display cou-
pler.
2. Set the main switch to "ON".
6 - 27
+
ELEC
Tester selec-
tor position
DCV-20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wr450f 2007Wr450fw 2007Wr450f

Table of Contents