Panasonic LightPix AE20 User Manual page 103

Item
CAP.D: (0 ~ 160 ms) 1
ms
Capture Delay
I.TRR: (ON / OFF)
Internal Trigger
INI.T: (1 ~ 7)
Initial Type
SPEED: (High / Mid /
Low)
Speed
T.TRG: (ON / OFF)
Teaching Trigger
96
Description
Indicates the waiting time for the LightPixAE20 to capture the image
after the TRIGGER signal input
But, the READY signal is turned off without delay after the TRIGGER
signal is input, irrespective of the Capture Delay time.
Inspection time (READY signal OFF time) will become longer by the
amount of the Capture Delay time
To select whether or not to execute an inspection by receiving the signal
to from the external device
•
ON:
Automatic continuous inspections (no need to receive the
TRIGGER signal from the external device)
•
OFF:
Executes an inspection for each TRIGGER signal input from the
external device
Product type No. that is called when turning on the LightPixAE20
Select your desired inspection speed from the following three options.
You can speed up the LightPixAE20 by changing the speed in the
following order: Low -> Middle -> High
Every time you change the speed, the "computation time" is also
changed. Speed for each application is as the table shown below:(Unit:
ms)
High
Color Jdgement 20
Color Pattern 100
Edge Detection 10
Measurement 15
If you set Speed to Middle or High, the unit scans the 352 pixels
(horizontal) x 288 pixels (vertical) by skipping some of them. Therefore,
the inspection results differ depending on the setting value.
Refer to the pages describing the Color Pattern Matching.
When the TRIGGER signal is input from the external device, you can
select whether or not execute a teaching.
•
ON: TRIGGER signal on
The LightPixAE20 executes a teaching after the TRIGGER signal
input TRIGGER
•
OFF: TRIGGER signal off
The LightPixAE20 executes a teaching only when the TRIGGER
button is pressed. It does not execute a teaching even when the
TRIGGER signal is input.
The setting of this function is effective only in TEACHING mode, not in
other modes.
Middle Low
50 150
200 500
15 20
20 30
Applica-
tion
All
All
All
Color
Judgement
/ Color
Pattern
Matching /
Edge /
Measurem
ent
All