Door Panel (Outer And Inner) - Removal; Inner Door Panel Removal - Miele G600 User Manual

Technical Information
5.10

Door Panel (Outer and Inner) - Removal

Note
This procedure does NOT apply to Pre-Finished models.
To Remove the Outer Door Panel
1. Remove the GDU or Custom Panel
2. Open the front door.
3. While supporting the Outer Door Panel; remove the six (6)
screws from the inside edge of the panel.
4. Lower the panel to remove.
To Remove the Inner Door Panel
1.
2.
3.
4.
5.
6.
Figure 5-13: Inner Door Panel Removal
7.
8.
9.
10.
Remove the Control Panel (5.47).
Remove the Fixing Bracket. Components can remain on the
Fixing Bracket (i.e. Electronic Unit, Handle) (5.48).
Remove the Insulated Matting between the Inner and Outer
Door Panels.
Remove the Dispenser (5.8).
Remove the Lock Assembly (5.12).
Remove the Fan (if applicable) (5.9)
Disconnect the Ground Wire.
Remove the Screws (Figure 5-13 – Item 3).
Open the Door. Remove the Raised Head Screws
(Figure 5-13 – Item 4).
Remove the Inner Door Panel in an upward direction.
G600 & G800 Electronic Dishwashers
66