Hard Wire Electrical Connection; Plumbing Connection; Intake Connection; Drain Connection - Miele G600 User Manual

Technical Information
1.4.5

Hard Wire Electrical Connection

Connections: L1 (Black) to L on terminal block, N (White) to N on
terminal block, GND To ground connector.
Hard wiring the dishwasher should only be done if required by
electrical code.
Do not cut the plug off the power supply cord / plug and connect it
directly to the house wiring under any circumstances. This voids the
warranty.
For hard wiring, the power cord must be removed from the
appliance by disconnecting the cord from the terminal box located
at the lower left front of the dishwasher, behind the Toekick and
Service Panel. Pass the permanent power supply cable through the
strain relief and secure it directly to the terminal box.
1.4.6

Plumbing Connection

1.4.6.1

Intake Connection

The appliance is equipped with a five (5) foot long Double WaterProof
System Intake Hose; equipped with a ¾ inch female hose connection;
for connection to a ¾ inch male hose thread water supply valve.
1.4.6.2

Drain Connection

The appliance is equipped with a five (5) foot long Drain Hose for
connection to a ¾ inch drain nipple.
THIS APPLIANCE MUST BE GROUNDED
16
G600 & G800 Electronic Dishwashers