Miele G 800 Series Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dishwasher
  5. G 800 Series
  6. Installation instructions manual
Miele G 800 Series Installation Instructions Manual

Miele G 800 Series Installation Instructions Manual

Integrated slimline dishwasher
Hide thumbs Also See for G 800 Series:
Table of Contents

Advertisement

Quick Links

See also: Technical Information , User Manual

Installation instructions

Integrated slimline dishwasher
UV
To prevent accidents
and machine damage,
read these instructions
before
installation or use.
M.-Nr. 05 620 692

Advertisement

Table of Contents
loading

Related Manuals for Miele G 800 Series

Summary of Contents for Miele G 800 Series

  • Page 1: Installation Instructions

    Installation instructions Integrated slimline dishwasher To prevent accidents and machine damage, read these instructions before installation or use. M.-Nr. 05 620 692...

  • Page 2: Table Of Contents

    Contents IMPORTANT SAFETY INSTRUCTIONS INSTRUCTIONS IMPORTANTES SUR LA SÉCURITÉ Caring for the environment Disposal of the packing material ........7 Disposal of an old machine .

  • Page 3: Important Safety Instructions

    Installation If there is any doubt concerning installation contact the Technical Installation, maintenance and Service Department. repair work should be by a Miele authorized service technician. Work by USA 1-800-999-1360 unqualified persons could be a hazard techserv@mieleusa.com and may void the warranty.

  • Page 4: Electrical Safety

    IMPORTANT SAFETY INSTRUCTIONS Electrical safety Child safety Before installation, make sure the Ensure that any plastic wrappings, voltage and frequency listed on the bags etc. are disposed of safely data plate correspond with the and kept out of the reach of babies and household electrical supply.

  • Page 5: Instructions Importantes Sur La Sécurité

    être parfois possible de faire blesser. l’installation de ces applications sous certaines conditions. Veuillez contacter le Concessionnaire Miele le plus près de chez-vous ou le Département du service technique Miele pour leur don- ner vos exigences précises. Inspecter le lave-vaisselle pour voir s’il a été...
  • Page 6 INSTRUCTIONS IMPORTANTES SUR LA SÉCURITÉ Sécurité électrique Sécurité des enfants Avant l’installation, s’assurer que la S’assurer de disposer de tous les tension et la fréquence énumérées emballages de plastique, sacs etc. sur la plaque signalétique correspon- et de les garder hors de la porté des dent à...

  • Page 7: Caring For The Environment

    Caring for the environment Disposal of the packing Disposal of an old machine material Old appliances may contain materials that can be recycled. Please contact The cardboard box and packaging your local recycling authority about the protect the appliance during shipping. possibilty of recycling these materials.

  • Page 8: Opening The Door

    Opening the door Opening the door without a Without the mounting bracket in place: panel in place ^ Grip the T shaped opening with a ^ Gently pull on the upper portion of finger and pull the door open. the mounting bracket until the door latch releases (small arrow).

  • Page 9: Product And Cut-Out Dimensions

    Product and Cut-out Dimensions G 800 Series Dishwashers Machine heights between 35" (890 mm) and 37" (940 mm) can be obtained if the supplied legs are removed and extended legs are attached. Contact the Technical Service Department for the appropriate legs.

  • Page 10: Installation

    Installation 1. Install the steam deflector If the counter is made of different A stainless steel steam deflector is materials, the steam deflector supplied to protect the countertop from should be positioned so that it steam and condesation when the covers the edge where the materials dishwasher is opened.
  • Page 11 Installation ^ Center the steam deflector in the ^ Press the optic indicator reflector in opening for the dishwasher and align place. with the lower front edge of the countertop. Note: For rounded countertops it may be necessary to pull the steam deflector closer to the counter’s edge so the optic reflector will be visible.
  • Page 12 Installation ^ Remove the backing from the other Stone or marble countertops: side of the sticker. The steam deflector is not required for countertops made of solid, waterproof material. But, it is needed for determining the correct position of the optic indicator reflector.

  • Page 13: Install The Slide Skis

    Installation 2. Install the slide skis Two slide skis are included and should be installed on the feet of the dishwasher before the machine is pushed under the countertop. This will allow the machine to slide easier, protect the floor, and allow adjustment of the rear leveling legs from the front of the unit.

  • Page 14: Install The Dishwasher Under The Countertop

    Installation ^ Make certain that there are no rough 3. Install the dishwasher under edges that could damage the power the countertop cord or hoses. If metal cabinets are The dishwasher must be installed so used, place the supplied rubber that the water and electricity supplies grommet around the edge of the can be accessed through an adjacent...

  • Page 15: Level The Legs

    Installation 4. Level the legs ^ Adjust the front leveling legs by ^ The rear leveling legs can be pushing on the feet with a slotted adjusted with a T20 Torx screwdriver by turning the screws at the front of screwdriver.

  • Page 16: Install The Custom Door Panel

    A custom door panel must be installed Range of panel height: on the dishwasher before it can be G 800 series ..27 " - 30 " safely operated. A single large panel or .
  • Page 17 Installation The door panel is attached to the dishwasher using the mounting bracket that comes secured to the front of the dishwasher. To remove the bracket: ^ Open the door 2 - 4" (5 - 10 cm). ^ Loosen the bracket retaining screw (black arrow) located on each side of the machine door.
  • Page 18 Installation ^ Using a pencil, lightly draw a vertical Install the bracket on the rear of the centerline on the panel (See the custom door panel illustration on the next page). ^ Push the dishwasher into its opening ^ Draw a horizontal line X inches up and adjust the height.
  • Page 19 Installation ^ Place the bracket on the door panel ^ Double check the location of the so the notches, a, cross the drawn bracket before mounting the panel to centerline, and the bottom of the the dishwasher. bracket lines up with the horizontal X The door handle must be installed on line.
  • Page 20 Installation Attach the front panel to the dishwasher ^ Open the door 2 - 4" (5 - 10 cm). The "T" shaped hanger behind the door handle should fit easily into its respective hole. ^ Place the lower mounting clips into the slots of the dishwasher door as shown in the illustration.

  • Page 21: Adjust And Secure The Front Panel

    Installation ^ Once this side of the panel lines up 6. Adjust and secure the front with the cabinets, secure it by panel tightening the upper screw on the Once installed, the panel can be raised edge of the dishwasher door. or lowered up to "...

  • Page 22: Secure The Dishwasher To Adjacent Cabinetry

    Installation 7. Secure the dishwasher to The side mounting holes adjacent cabinetry should only be used for securing Only for openings exactly 17 " the dishwasher if the opening is (45 cm) wide: exactly 17 " (45 cm) wide. Using this method on larger openings may damage the machine and cause leaks.

  • Page 23: Adjust The Door Springs

    – turn counterclockwise to decrease the tension. Note: If the door springs can not be adjusted enough (the door falls), the custom door panel is too heavy. Call your Miele dealer or the Technical Service Department for advice on stronger door springs.

  • Page 24: Make The Plumbing Connections

    Installation 9. Make the plumbing New plumbing: connections The water inlet hose comes equipped with a " female hose thread con- An air gap is built into the water inlet nector. This can be directly connected system to prevent potable water from to a shut off valve with "...
  • Page 25 Installation Existing plumbing: If the standard " copper plumbing for a dishwasher already exists with a compression fitting and valve as pictured: WARNING - Elcetrical Hazard Do not cut the intake hose. If the hose is cut, the dishwasher will not work.
  • Page 26 Do not shorten the drain hose. connection nipple. (See the disposal manufacturer’s instructions for this Do not connect the drain hose to procedure.) anything but a genuine Miele hose. Other hoses may melt or collapse.
  • Page 27 Venting the drainage system Additional note If the dishwasher drain hose is Since all Miele dishwashers are connected to a floor drain or to a equipped with an odor trap and non- drain pipe that is less than 8" (20 cm)

  • Page 28: Make The Electrical Connection

    If there is any question about the proper electrical connection or grounding of this appliance to the power supply, please consult a licensed electrician or call Miele’s Technical Service Department: USA 1-800-999-1360 CDN 1-800-565-6435...
  • Page 29 Installation Power outlet Permanent Connection (Hard Wiring) The power outlet for the appliance must For hard wiring, the power cord must be installed within a cabinet, on a wall be disconnected from the terminal box adjacent to the undercounter space in located at the lower left front of the which the dishwasher is located.

  • Page 30: Test The Unit

    Installation ^ If the optic indicator reflector does 11. Test the unit not shine, realign the dishwasher. Once the dishwasher is level and ^ Check for any leaks, odd noises and secured it should be tested. flashing / lit fault indicators on the ^ Remove all packing and literature control panel.

  • Page 31: Install The Toekick

    Installation 12. Install the toekick If the door panel hits the toekick when the dishwasher door is opened, the For installations using a continuous toekick must be cut shorter or recessed deeper. toekick or a cabinet matching toekick Note: Before installing the toekick, measurements must be taken to ensure If a decorative or flush mount toekick is desired, and (R) is less than...
  • Page 32 Installation For installations using the included The included toekick will fit without modification if the machine is set to its plastic toekick maximum height and the toekick is recessed as far as possible (4" / 10 cm). If the machine height is less than maximum, or if the toekick is not ^ Insert the mounting bracket with the flange pointing toward the outside of...
  • Page 33 Installation ^ Screw the toekick onto the installed ^ Carefully open the dishwasher door brackets, with the cutting lines until it hits the toekick. towards the top, and pull out evenly ^ Using the front lower edge of the and slowly until it aligns with the door panel as a guide, draw a line toekick of the adjoining cabinets.
  • Page 36 Alterations rights reserved / MVi45 3304 M.-Nr. 05 620 692 / 01 This bio-friendly paper was bleached without the use of chlorine.

Table of Contents