Depth Display (Optional: Triducer-Multi Sensor Has Been Installed); System Voltage Display - Yamaha 6Y8- 2819U-00 Owner's Manual

Depth display (optional: Triducer-multi
sensor has been installed)
DEPTH or DPTH displays the water depth.
NOTE:
You can select to show feet (F) or meters
(m) on the DEPTH or DPTH display. To
change the displayed unit, see "UNIT (set-
ting displayed units)" in "Changing settings
(custom mode)."
Depth display/System voltage display

System voltage display

BATTERY or BAT shows the supplied volt-
age to the meter circuit. The system voltage
display differs from the tachometer unit volt-
age display (battery voltage). In addition, the
voltage value may be changed according to
the meter connection specifications.
When the battery voltage decreases to 12
volts or less or increases to 16 volts or more
the voltage value blinks.
CAUTION:
• When the low battery voltage warning
• If you cannot locate and correct the
54
Blinks
comes on, check the battery and the
wiring.
cause, consult a Yamaha dealer.