Changing backlight settings/Changing settings (custom mode)
Changing backlight settings
You can turn the backlight on or off, or
change the brightness level of the backlight
for all meters collectively. You can also
change the settings for each meter individu-
ally.
NOTE:
The backlight setting procedure is the same
as that of the tachometer unit. To change
the backlight settings, see "Changing back-
light settings" in "1. Tachometer unit."
Changing settings (custom mode)
Switching to custom mode
In the custom mode, you can change the
meter function settings. "CUSTOM" and
each setting function name are scrolled on
the meter.
1.
Turn the engine off and the engine start
switch to ON.
2.
(4 seconds): To activate the cus-
tom mode.
3.
: Press to switch between the set-
ting function names (custom mode
selection display).
DISPLAY (setting displays)
UNIT (setting displayed units)
FUEL SENSOR
(setting fuel sensor)
4.
: To switch to the change settings
display.
5.
Change the various settings and return
to the custom mode selection display.
To change the settings, see the corre-
sponding sections for each setting func-
tion.
6.
(1 second): To return to the nor-
mal display.
29