Table of Contents
Advertisement
4.7 Maintenance Timer
The maintenance timer keeps track of the time until the
next recommended maintenance according to the
maintenance schedule for the 14RESAL or 20RESAL
generator set.
Reset the maintenance timer after
changing the oil and performing the other maintenance
tasks recommended in Section 5.
To reset the maintenance timer:
1. Press and hold the OFF and AUTO buttons
together until Maintenance Timer Reset is
displayed.
2. Release the OFF and AUTO buttons.
TP-6804 12/11
4.8 OnCue Password
To set the OnCue password on the DC2 controller,
1. Press the OFF button and verify that the generator
set is not running.
2. Press and hold the Exercise button until Press
Again to Reset OnCue PW is displayed.
3. Release the Exercise button and press it again
within 5 seconds.
Note: If the Exercise button is not pressed within 5
seconds, the controller exits the password
reset mode.
4. The genset serial number and new password (PW)
will be displayed for 10 seconds.
password for entry into the OnCue program.
Section 4 DC2 Controller Operation
Record the
55
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the 14/20RESA and is the answer not in the manual?
Questions and answers
How do I know my Generator will maintenance run each week
The provided context does not contain specific instructions for scheduling a weekly maintenance run for the Kohler 14/20RESA generator. However, you can refer to the generator’s controller settings or user manual to set up an automatic exercise cycle. If needed, contact an authorized Kohler distributor or dealer for assistance.
This answer is automatically generated