This feature prevents unauthorized personnel from changing settings made by the printer administrator. For regular printing,
items can be selected from the menu and printer settings remain unchanged. For regular printing, items can be configured
using the printer driver.
NOTE:
Disabling the operator panel menus does not prevent access to the Stored Print, Tray Settings, and
Replace Toner menus.
1. Press Menu.
2. Press
until Configure appears, and then press
3. Press
until Security appears, and then press
4. Panel Lock is displayed. Press
5. Press
until On appears, and then press
6. Press
.
7. Press
until Change Password appears, and then press
8. Enter the old password (when you enter it for the first time after doing the settings, enter 0000), and then press
9. Enter the new password, and then press
10. Reenter the password to confirm the password that you entered, and then press
The password has been changed.
NOTE:
If you forget your password, turn off the printer. Then, while holding Menu, turn on the printer. Continue to
hold Menu until the display indicates Ready to Init. Release Menu and press
. The display will briefly indicate Password has been initialized. This will recover the factory default panel
password.
NOTE:
If panel lock is On, the factory-default panel password is 0000.
See also:
"Change
Password"
Enabling Menus
1. Press Menu.
2. Press
until Configure appears, and then press
3. Press
until Security appears, and then press
4. Panel Lock is displayed. Press
5. Press
until Off appears, and then press
or
or
.
or
.
.
.
or
or
.
or
.
.
.
or
.
. Press
.
.
to select Yes, then press
.