Dell 3000cn Color Laser Printer User Manual page 25

Asset Tag Number Specifies the asset tag number.
EWS Auto Refresh
Settings
Auto Refresh
Interval
NOTE: The auto refresh feature is effective for the contents of the Top Frame, Printer Status page, Job List page,
and Completed Jobs page.
Port Settings
Purpose:
To specify whether to enable or disable printing ports and management protocol features.
Values:
Ethernet Ethernet
Settings
Current Ethernet Settings
MAC Address
Port LPD
Settings
Port9100
FTP
E-Mail Alert
SNMP Agent
NOTE: The settings in the Port Settings item will be valid only when the printer is rebooted. When you change or set
this item, click the Restart printer to apply new settings. button to apply new settings.
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer.
Values:
On Refreshes the contents of the status display pages automatically.
Off Does not refresh the status display pages automatically.
Sets the time interval for refreshing the contents of the status display pages automatically
from 15 to 600 seconds.
Auto Detects Ethernet transmission rate and the duplex settings automatically.
10BASE-T Half- Selects 10Base-T Half-Duplex as the default value.
Duplex
10BASE-T Full-
Selects 10Base-T Full-Duplex as the default value.
Duplex
100BASE-TX
Selects 100Base-T Half-Duplex as the default value.
Half-Duplex
100BASE-TX Full- Selects 100Base-T Full-Duplex as the default value.
Duplex
Displays the current settings of Ethernet.
Displays the printer's MAC address.
Select the check box to enable the LPD.
Select the check box to enable the Port9100.
Select the check box to enable the FTP port.
Select the check box to enable the E-Mail Alert feature.
Select the check box to enable the SNMP.
You can also configure the transport protocol to be used. UDP can be
selected as the transport protocol.