Dell 3000cn Color Laser Printer User Manual page 118

Close Duplex Mod
077-308
Duplex Module
Is Open
CarrierAlignment
093-310
Reinsert Toner
Cartridge
Load XXX
NNN-NNN
Load XXX
YYY
Load XXX
yyy
Load Tray
024-964
Load XXX
YYY
Load XXX
yyy
Out of Memory
016-700
Job too Large
Press Set
Disk Full
016-980
Job too Large
Press Set
PCL Request
016-720
Invalid PCL file
Press Set
Invalid Job
016-799
· BTR Cover
· Paper Cover
· Feeder 1 Cover
· Feeder 2 Cover
· Duplex Cover
Error NNN-NNN relates to printer
problems.
Optional duplex module is open.
The toner cartridge does not rotate
properly during replacement.
Incorrect paper size is loaded in the
specified tray.
XXX indicates the number of the tray
or multipurpose feeder.
YYY indicates a paper size.
yyy indicates paper quality.
Error NNN-NNN relates to printer
problems.
Incorrect paper sizes are loaded in all
trays.
YYY indicates a paper size.
yyy indicates paper quality.
The printer memory is full and cannot
continue processing the current print
job.
Error NNN-NNN relates to printer
problems.
RAM disk memory is full and cannot
continue processing the current print
job.
Error relating to PCL emulation
problems occurs.
When the configuration of the printer
on the printer driver does not
Close the optional duplex module.
· Open the front door.
· Confirm that toner cartridges are securely
installed.
Load the specified paper size in the specified trays.
See "Loading Print Media in Optional
Load the specified paper in all the trays.
See "Loading Print Media in Optional
· Press to clear the message, cancel the current
print job, and conduct the next print job, if any.
· Press Cancel to cancel the current print job.
· Press Menu to open the Stored Print and delete
the holding job.
· To avoid this error in the future, do the following:
· Delete unnecessary fonts, macros, and other
data in printer memory.
· Install additional printer memory.
See "Accessing Held Jobs From the Operator
· Press to clear the message, cancel the current
print job, and conduct the next print job, if any.
· Press Cancel to cancel the current print job.
· Press Menu to open the Stored Print and delete
the current job.
· To avoid this error in the future, do the following:
· Reduce the number of print pages such as
splitting the print data.
· Increase free memory space by deleting
unnecessary data in the RAM disk.
See "Accessing Held Jobs From the Operator
· Press to clear the message, cancel the current
print job, and conduct the next print job, if any.
· Press Cancel to cancel the print job.
· Press Cancel to cancel the print job.
Trays"
Trays"
Panel"
Panel"