Securing The Plasma Display Tv (Panel Unit) To The Wall; Fixing The Plasma Display Tv (Panel Unit) To A Desk Or Floor - Sharp PZ-43HV2E Operation Manual

Preparation
2
Commercially
available
Securing bracket
Desk
10
1
In the case of
PZ-50HV2E
1
In the case of
PZ-43HV2E
2
1
Soft cloth
(rear view)
4
Securing the Plasma Display TV (Panel
Unit) to the wall
1
Fasten the two supplied eyelet screws.
2
Thread a suitable wire or rope through the eyelet
screws, and attach this to the wall at both sides.
Make sure that the Plasma Display TV (Panel
Unit) is firmly installed to the wall.
A
• The wire, rope and suitable fixings for these are available
commercially .
• The eyelet screws fit on different locations depending on
the Plasma Display TV (Panel Unit) screen size.
In the case of PZ-50HV2E
In the case of PZ-43HV2E
Fixing the Plasma Display TV (Panel
Unit) to a desk or floor
The unit can also be secured via the stand.
1
Cover a desk with a suitable soft cloth, and place
the Plasma Display TV (Panel Unit) on its side.
2
Attach the securing bracket as shown, using the
supplied screws.
3
Stand the unit upright and place in position.
4
Secure the unit to the desk or floor as shown in
the diagram, with suitable fixings (commercially
available).