Launching The Alertviewer; Displaying Nec Esmpro Agent Traps - NEC Express5800 series User Manual

Esmpro manager

Hide thumbs Also See for Express5800 series:

Table of Contents

Launching the AlertViewer

To launch the AlertViewer, select [Tools] - [NEC ESMPRO Manager] - [AlertViewer].

HP OpenView Integration enables SNMP traps sent by NEC ESMPRO Agent to be displayed on the

Alarm Browser of HP OpenView.

The ESMPRO/SM Trap Redirection service receives an SNMP trap sent by NEC ESMPRO Agent

and sends it to the HP OpenView Network Node Manager (local host).

Then, the SNMP trap is displayed on Alarm Browser.

The setting for this forwarding function is always automatically done at installation. However, you

may have to manually set it after the installation if:

– 'public' is not registered as the SNMP community name that HP OpenView accepts.

– Other settings have been already set for the ESMPRO/SM Trap Redirection service.

In such cases, select [NEC ESMPRO Manager] - [SNMP Trap Redirection Setting] from the Start

menu to launch SNMP Trap Redirection Setting, and change or add the following items in

Destination Setting:

Host name or IP address: 127.0.0.1

Community name:

The name of an SNMP community that HP OpenView accepts

HP OpenView Integration 89

Table of Contents