NEC Express5800 series User Manual page 89

Enter the object ID in the Object ID box. The object ID can be selected from the Object
3.
ID List by clicking [Browse...] if needed.
Set Duration, Interval, Maximum Value and Minimum Value.
4.
Set the appropriate threshold values.
5.
Enable Polling allows you to set whether or not to monitor MIB. The value set in Interval
6.
is enabled only when this is checked.
NOTE:
Local Polling is a function for monitoring any items (only integers).
This function is called "Local Polling" because the server status is
monitored on the agent side (local) according to the values set. With
this function, you can monitor the managed servers according to your
system by setting a threshold. For example, the server status color will
change and/or an alert will be sent when the monitored values are out of
the threshold range.
If another SNMP agent is installed on the server to be managed, the
MIB defined in that product can be monitored in the same way as above.
Note that an understanding of the managed server MIB information is
required to determine appropriate local polling settings.
Web Component 83