Before You Manage Server(S) Via Web Browser; Re-Creating The Virtual Directory For The Web Component - NEC Express5800 series User Manual

54 Web Component

Before You Manage Server(s) via Web Browser

Adding the server you want to manage
1.
There is no server registered in the NEC ESMPRO Manager right after the installation.
Before you manage the server via your web browser, register the server you want to
manage using the Manager (not web-based).
Updating the Agent Version
2.
In order to run DataViewer or Agent Control Panel for the managed servers registered, the
Agent Version property must be set properly.
To set the value, open the Operation Window in the Web Component and execute 'Agent
Version Update' with the target servers.
Setting the number of the alerts to be stored
3.
To increase the number of alerts to be stored, specify the number of the alerts in the
Manager (AlertViewer) beforehand. The default is 500 alerts.

Re-creating the Virtual Directory for the Web Component

Even if you perform an overwrite installation, a virtual directory is not created.
If you have deleted the virtual directory for the Web Component, follow the instructions shown
below to re-create it.
Logon to the Web server as a user with administrative privileges, and open the Command
1.
Prompt.
Type 'cd "C:\Program Files\ESMPRO\ESMBASE\ESMSMWEB"' to change the
2.
current directory.
* NEC ESMPRO Manager is assumed to be installed on "C:\Program Files\ESMPRO".
Type 'cscript sitelist.vbs'.
3.
A list of Web sites that exist on the Web server will appear. The numbers displayed on the
left are the Web site numbers. Confirm the web site number for which you want to create
the virtual directory.
Type 'cscript websetup.vbs -s the site number -a the virtual directory name'.
4.
* '-s 1 -a esmpro' is set up in the initial setting.