Using the Function Control
DVD
DVD-RW
DVD
DVD-RW
VIRTUAL DOLBY (QSURROUND) setting
This function allows you to enjoy a "surround sound" effect when you are using
an analogue connection (using AUDIO OUT on the Player) to 2-channel audio
equipment (TV, etc.).
Preparation:
To use the VIRTUAL DOLBY (QSURROUND) function
• Set the "COMPRESSION" setting in "AUDIO SETUP" to "OFF" (see page 47)
and set the "SPEAKER" setting in "SPEAKER SETUP" to "2ch" (see page 56).
Refer to the table below about the types of audio format with which VIRTUAL
DOLBY (QSURROUND) works.
Types of audio recorded
"SPEAKER" settings
in "SPEAKER SETUP"
The speaker mode is set to
"2ch".
Use the following procedure to change the setting between "ON" and "OFF",
and the level for the VIRTUAL DOLBY setting.
1
Press FUNCTION during playback.
• The Function control screen appears.
2
Use ' or " to select
ENTER.
82
GB
on the disc
Dolby
Digital
and then press
Dolby Digital
Dolby
2ch/Linear
Pro Logic
PCM
✕
ON
DTS/MPEG
Audio
Ver. 2.0
✕
DVD