Sharp DV-L80S Operation Manual page 31

Using the Battery Pack
1
Plug the AC cord into the power socket
of the AC adapter (1).
• Push the cord straight into the AC
adapter as far as it can go.
2
Plug the other end of the AC cord
into a household power outlet (2).
3
Plug the DC cord into the battery
pack (3).
POWER (G)/CHARGE (R) Lamp
The POWER (G)/CHARGE (R) lamp lights red
while charging is in progress, and flashes red
when the battery pack is fully charged.
Important!
• Make sure that the Player's power is turned off before attaching or detaching
the AC adapter.
• A battery pack that is attached to the Player does not charge while the Player is
turned on. Turn power off in order to charge the battery pack.
• Before storing a battery pack, fully discharge it by using it to power Player
operation. At least every six months, charge a stored battery pack and use it
to power the Player.
• The battery pack becomes warm when charging. This is normal and does not
indicate abnormality.
• If the POWER (G)/CHARGE (R) lamp flashes red at high speed or does not light
red when charging, it could mean the battery pack is faulty. See
"Troubleshooting" on page 103.
Using the AC adapter with the battery pack
• You can charge the battery pack while it is attached to the Player by
connecting the AC adapter to the Player and turning off Player power.
• The Player is powered by the AC adapter if you turn it on under the
above conditions. The battery pack is not charged while Player power is
turned on.
30
GB
1
For
the U.K.
and Eire
2
2
3