Audio Setting - Sharp DV-L80S Operation Manual

DVD DVD-RW
DVD DVD-RW

Audio setting

A number of different methods are used to record audio onto a DVD video disc,
including multi-channels (used for voiceovers in other languages), Dolby Digital
(5.1ch), DTS, and linear PCM. Your Player provides a number of different audio
modes from which you can choose to suit the type of disc you are playing.
Use the following procedure to perform the Audio setting.
1
Press FUNCTION during playback.
• The Function control screen appears.
2
Use ' or " to select
ENTER.
3
Press ' or " to select the audio format
you want to use.
• See page 111 for details about the
types of audio format.
• When playing a DVD-RW, VIDEO CD or
Audio CD, the audio playback changes
in the following sequence:
L+R
4
Press ENTER to confirm the setting.
• You can exit the Function control screen by pressing FUNCTION or
RETURN.
• When you set the "PRO LOGIC" setting in "AUDIO SETUP" to "ON" (see page
51), selecting an audio format that uses "PRO LOGIC" causes "
appear.
• This function can only be used for discs on which the sound has been recorded
in multiple formats.
• To play back VIDEO CDs recorded with DTS format, audio mode should be set to
"L+R". The Digital signal cannot be output correctly if audio mode is set to "L" or "R".
• With certain types of discs, you can change the audio using the disc menu. (See
page 96.)
• A DTS digital surround decoder is required to listen to DTS audio.
VIDEO VIDEO
C D
C D
C D
C D
and then press
L R
Using the Function Control
1 5. 1 ch .
2LPCM
D+PL" to
DVD
DVD
81
GB