Display Setup - Kenwood DNX7280BT Instruction Manual

3
Follow the instruction on the screen.
Recall
Recalls the memorized settings.
Memory
Memorizes the current settings.
Clear
Clears the currently memorized settings.
Cancel
Quits memorization/recalling of settings.

Display Setup

1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Display].
Display Menu screen appears.
See the following section for each setting.
• Control monitor angle
• Adjust panel color (P.72)
• Changing background image
You can adjust the position of the monitor.
1
2
(P.71)
(P.73)
Return to the Top page
Monitor angle control
Touch [Angle] in the Display Menu
screen.
Angle setup screen appears.
Select a below number that
represents your desired angle setting.
NOTE
• You can store the current monitor angle as the
angle during power off. Touch [Memory] when
the desired angle is selected.
• The front panel can be set to open automatically
when the ignition is turned off, so that it can be
detached for antitheft purpose. Touch [ON] of
[Auto Open].
Setting Up
71