Screen Seek Mode Auto Memory Manual Memory Preset Select Radio Text Traffic Information Search for Program Type DNX7220 Basic Operations iPod Control Connecting an iPod Functions when Displaying the Easy Control Panel Functions while Displaying the Control Screen iPod List...
Page 3
Screen Control Hands Free Unit Control Control Screen Function When Received a Call Calling by Entering a Phone Number Quick Dialing Controlling tone-based services Calling by Phonebook Making a Call Using Outgoing/Incoming Call Records Calling by Voice Recognition Setting Up the Hands Free Phone Voice Registration Key Word Voice Registration Phone Number Preset...
For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. DNX7220 Seek Mode Sets a station selection. The mode is switched in following order each time you touch the button.
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters conforming to ISO 8859-1 character set can be displayed.
Notes iPod that can be connected to this unit You can control an iPod from this unit by connecting an iPod (commercial product) with Dock connector using an optional accessory iPod connection cable (KCA-iP300V). The following iPods can be controlled from this unit. •...
Page 8
• When the iPod is connected to this unit, "KENWOOD" or "✓" is displayed on the iPod to indicate that you cannot operate the iPod. • When the USB device is connected to this unit, it can be charged up provided that this unit is powered.
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. DVD disc marks Symbol Description Indicates a region number. The discs with this mark can be played with any DVD player.
Refer to <USB Device Control> (page 36). ¤ • Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device. DNX7220 Switches to the Navigation system Press the button to switch the display to the navigation system screen.
Page 11
Selecting a source Press it to display the source select screen. Touch the source button to select the source. Full Source Select screen Favorite Source Select screen Playing a disc When you load a disc into disc loading slot, the disc starts playing. If a menu appears, when playing a video disc, select the desired item.
Page 12
Listening the traffic information Press it for more than 1 second to turn the Traffic Information function On or Off. (page DNX7220 Switches to the rear view Press it for more than 1 second to switch to rear view.
Page 13
Switching the function screen The function control screen switches in the following order each time you press the button. Navigation screen Picture or Video playback [FNC] button Easy Control buttons appear. Navigation screen SCRN DVD MEDIA PICTURE Easy Control button ⁄...
• You can set the navigation system function when nothing else is displayed on the screen. If anything else, such as Easy control panel is displayed, erase it first. DNX7220 Control of Other Sources While Displaying the Navigation Screen Selected source can be controlled while displaying navigation screen.
Page 15
time. (DVD play only) 5 Plays or pauses. 6 When touched this area, the source control screen appears. When "USB" or "iPod" is selected: iPod 7 During iPod play : Searches Music or Video. During USB play : Selects a file. 8 Plays or pauses.
3 Play Time Display 4 Forward Chapter Search Area Selects the next chapter. 5 Backward Chapter Search Area Selects the previous chapter. DNX7220 6 DVD Disc Menu Control Buttons Area Displays the Disc Menu Control buttons (page 18). The Highlight Control screen appears when pressed while the DVD Top menu is displayed.
Functions When Displaying the Easy Control Panel Displays the basic operation buttons on the screen. While the source is playing, press the [FNC] button Mode:Full AV–OUT:AV–IN DVD VIDEO SCRN DVD VIDEO Title C h a p 1 Chapter Search (during DVD play) Searches for a chapter.
Appears when PBC is On. s VCD version indicator d Displays the external device control screen. See <External Device Power Supply Control> (page 45). DNX7220 DVD Disc Menu Selects an option from the DVD Disc Menu. Display the Disc Menu Control screen Mode:Full AV–OUT:AV–IN...
Page 19
Highlight Control You can select a chapter and title for the DVD Menu screen. When you touch the screen, you can select the DVD menu. M e n u C t r l M e n u C t r l E n t e r E n t e r C a n c e l...
1 Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. 2 Scrolls the screen in the direction you touch. 3 Clears the Zoom Control button. DNX7220 AV–OUT:AV–IN 0 : 0 5 E x i t E x i t...
Music Disc & Audio File Listening You can recall various control screens during CD/Audio file playback. • For the basic method of how to play a music disc/audio file, refer to <Basic Operations> (page 10). • Refer to <List of playable discs> (page 7) for playable discs. •...
Page 22
Displays the Hands Free screen. (page 49) i Function Indicator o MUSIC, MOVIE or PICTURE indicator DNX7220 ; Appears when a disc is inserted. a Repeats to play the music or data of the s You can search for folders and Audio files...
Set Disc Name Assigns a name to a CD. Play a CD you wish to name Start Name set Enter the name See <Character Entry> (page 47) for information on how to enter a name. End Name set Folder Select (Function of Audio File) Searches folders and Audio files stored in media and devices according to hierarchy.
Selects the previous file. 5 JPEG: Picture Control Button Area (page 26) MPEG: Not effective 6 Information Display Button Area DNX7220 ⁄ • The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated.
Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions. While the source is playing, press the [FNC] button Mode:Full AV–OUT:AV–IN DVD MEDIA SCRN DVD MEDIA PICTURE 1 Switches to the playback screen. 2 Folder and File Number Display 3 Play Mode Display 4 Play Time Display...
Radio Listening Various control screens appear in the Tuner Source mode. • For the basic method of receiver button operations, refer to <Basic Operations> (page 10). • Set the remote controller mode switch to "AUD" mode before starting operation, refer to <Remote Controller mode switch> (page 86).
"AUTO2" Tunes in stations in memory one after another. "MANU" Switches to the next frequency manually. DNX7220 Auto Memory Stores stations with good reception in memory automatically. Select a band you wish to store in memory Select the Auto Memory mode...
Manual Memory Stores the current receiving station in memory. Select a station you wish to store in memory Store in memory Continue to touch until the memory number appears. : Press for # seconds. Preset Select Lists and selects memorized station. Start Preset Select Selects a station 1 Scrolls the list.
2 Scrolls the text display. 3 Returns to the original screen. DNX7220 Traffic Information When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically.
Search for Program Type A program is tuned when you set its program type. (Only when receiving the FM broadcast) Enter Program Type mode Select a Program Type 1 Program Type is displayed. Touch to select a Program Type. 2 Scrolls the Program Type list. Search a station of the selected Program Type English...
(Resume Function). • If the played song is not a video content, "No iPod Video Signal" is displayed on the video screen. • While connecting an iPod, "KENWOOD" appears on the iPod and the iPod's control is disabled. DNX7220 Functions when Displaying the Easy...
Functions while Displaying the Control Screen Switches to the source control screen to use various playback functions. When Video or picture is playing, press the [FNC] button. Mode:Full AV–OUT:AV–IN iPod SCRN iPod 1 Image picture Switches to the playback screen. If there is no playback screen, wallpaper is displalyed.
When is appeared, the text display is scrolled by pressing it. 3 All the music in its category is played. 4 Returns to previous category. 5 Moves to the top category. 6 Displays the currently playing category. DNX7220...
Selects the Folder Name, File Name, TItle, Artist Name, or Album Name. When is appeared, the text display is scrolled by pressing it. DNX7220 5 Removes the USB device. 6 Selects a folder. (Only in Folder Select 7 Selects a file. 8 Plays or pauses.
USB List Lists and searches music contained in the USB device. Display the Category List Select a category When is appeared, the text display is scrolled by pressing it. 1 Displays the currently playing category. 2 Returns to the original screen. Select music 3 Switches to the lower level of the category.
8 Information Display Button Area ⁄ • The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated. DNX7220 Functions When Displaying the Easy Control Panel Displays the basic operation buttons on the screen.
Functions While Displaying the Control Screen Switches to source control screen to use various functions. While the source is playing, press the [FNC] button Mode:Full AV–OUT:AV–IN SCRN BAND P r e s e t 1 T V 1 1 Switches to the TV screen. 2 Band display 3 TV Area Group Display See <TV Setup>...
3 Returns to the previous screen. 4 Executes selected menu item. 5 Returns to Digital TV screen. 6 Moves highlight in Digital TV Broadcasting menu. DNX7220 Seek Mode Sets a station selection. AV–OUT:AV–IN P r e s e t 1...
Auto Memory Stores stations with good reception in memory automatically. Select a band you wish to store in memory Select the Auto Memory mode Start Auto Memory Auto Memory terminates when 6 stations are stored or when all stations are tuned in. ⁄...
Lists and selects memorized station. Start Preset Select Selects a station 1 Memorized stations are displayed. Touch to tune in. DNX7220 Set Station Name Assigns a name to a station. Select a station you wish to name Start Name set Enter the name See <Character Entry>...
6 Displays the external device control screen. See <External Device Power Supply Control> (page 45). ⁄ • If the Bluetooth Audio player does not support AVRCP profile, buttons 1 to 4 are not displayed. Operate from the Audio player. DNX7220...
External Device Power Supply Control Controlling the external device power supply. External Device Power Supply Control Controlling the external device power supply. Displays the EXT SW Control screen [EXT SW] appears when the control screen of each source or Easy control panel is displayed. Controls the external device power supply 1 You can turn on or off the external device power supply.
When the call ends... Hang up the phone. The system resumes playing automatically. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <INSTALLATION MANUAL>. DNX7220...
Character Entry When you select the Set Station Name mode or others, the following screen appears for character entry. How To Use the Character Entry Screen Character Entry screen 1 Shifts the cursor. 2 Enters characters. 3 Scrolls up or down the character button display.
On or Off. "NAV-SYNC": Turning the Dimmer function On or Off according to the Navigation DNX7220 7 Returns to the previous screen. ⁄ • The Screen Control screen is displayed only when you have applied the parking brake.
Hands Free Unit Control Various functions can be used in the Hands Free control mode. (with the optional accessory Bluetooth unit connected only) • You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well.
3 Switches the voice output between phone and speaker. 4 Outputs dial tone. See <Controlling Tone-based Services> (page 51). DNX7220 Calling by Entering a Phone Number Make a call by entering a phone number. Display the number input screen Enter a phone number 1 Calls the entered phone number.
Quick Dialing You can register up to 6 phone numbers for quick dialing. ⁄ • Phone numbers must be registered in advance. See <Phone Number Preset> (page 58). Recall the phone number Make a call ⁄ • Only the phone numbers can be registered for Quick Dialing.
3 Returns to the Hands Free Control screen. Initial number screen 4 Displays a list of numbers in the Phonebook starting with the selected number. DNX7220 Cyrillic alphabet search screen А 5 Displays the Phonebook beginning with the name whose first character you have touched.
r Calls the selected phone number. t Creates an SMS for the displayed phone number. See <SMS (Short Message Service)> (page 59). y Scrolls the phone number. u Returns to the Name List screen. i Returns to the Initial Input screen. Make a call ⁄...
If the voice recognition is succeeded and there is only one phone number found: Make a call. 3 Displays the phonebook list. DNX7220 If you hear another Beep sound: Speak the key word within 2 seconds after the Beep, or touch the [Phonebook List] button to select the phone number.
Setting Up the Hands Free Phone The Hands Free system can be set as follows. Display the Hands Free Setup screen Setup each item 1 Moves to the "Hands Free Set Up 2" screen. 2 Sets an automatic response time after call termination.
2 Registers the voice. 3 Cancels voice registration. Utter within 2 seconds after the Beep. Utter the voice to register (2nd try) DNX7220 End voice registration ⁄ • A message is displayed if the voice is not recognized. Read the message for the further operation.
Key Word Voice Registration Registers the voice to select the Phone number category by Voice Recognition. Display the Key Word List screen Display the "Hands Free" screen and touch [Setup]. See <Control Screen Function> (page 49). Select the Phone number category to register 1 Selects the Phone number category.
7 Registers by entering phone numbers. 8 Registers voice for voice recognition to preset number. 9 Registers the currently displayed phone number. DNX7220 p Deletes the currently displayed phone number. q Returns to the previous screen. Search phone number to register with...
SMS (Short Message Service) Uses SMS function. Display the SMS Select screen Select a function 1 Displays received message list. 2 Displays sent message list. 3 Displays the Message screen. If there is an unfinished message, the button will be active.
• [Audio SETUP] and [AV Interface] options can be locked. The key mark is displayed in reverse video for the locked option. See <Setup Memory> (page 79). DNX7220 Audio Setup You can setup a speaker network, etc. Display the Audio SETUP screen Touch Menu"...
Crossover Network Setup You can set a crossover frequency of speakers. Select the speaker to set the crossover 1 Sets the High Pass Filter of the front speaker. 2 Sets the High Pass Filter of the rear speaker. 3 Sets the Low Pass Filter of the sub woofer. 4 Switches to the crossover setup screen.
The Display of a JPEG picture is changed. ("Short", "Middle", "Long") y Returns to the "SETUP Menu" screen. ⁄ • *1 Disabled when a DVD is being played. DNX7220 Language Setup Selects a language you use for the speech and menus. Select the language item to set See to <DVD Setup>...
Parental Level Setup Sets a parental level. Display the Parental Level code number screen See to <DVD Setup> (page 61) and touch [Parental Level]. Enter the code number 1 Enters a code number. 2 Cancels the current setup and returns to the "DVD SETUP 2"...
Also, you may not play some music CDs in the "2" position. • Your setup is disabled when the disc is being played. DNX7220 in the "SETUP 7 Returns to the "SETUP System 1" screen. 8 Sets the function of the [NAV] button.
AV Interface Setup You can set audio and visual (AV) interface parameters. Display the AV Interface screen Touch Menu" screen (page 60). Setup each item 1 Moves to the "AV Interface 2" screen. 2 Sets a name to be displayed when you select a system that is connected via the AV INPUT port.
Displays in the Russian character. "Off": Displays in the Europen character. 6 Returns to the "SETUP Menu" screen. DNX7220 in the "SETUP 7 Returns to the "User Interface 1" screen. 8 Moves to the "User Interface 3" screen. 9 Sets an on-screen display of the iPod Playback screen.
seconds when updated. "Manual": Information is displayed when you touch on the screen. u Returns to the "SETUP Menu" screen. i Returns to the "User Interface 3" screen. o Sets whether to display animation when switching screens. ( "On") ; Sets whether to display the name of the , and buttons on the right side of the menu screen.
• Refer to <About Picture files> (page 8) for readable image specifications. • Up to 3 images can be loaded. • This operation is not possible when USB is selected as the source. DNX7220 Background Delete Deletes the background image. Display Delete Image Select screen in the "SETUP Select the image to be deleted 1 Returns to the original screen.
Background Select Selects a image for background. Select Background Change screen Select a image for background 1 Returns to the initial background. 2 Returns to the original screen. Set the image as the background Touch Panel Adjustment You can adjust the touch panel operations. Display the Touch panel Adjustment screen Touch...
When the synchronized mode is set, the clock cannot be adjusted manually. 6 Returns to the "SETUP Menu" screen. Adjust the clock time DNX7220 Monitor Setup You can adjust the position, picture quality and the screen mode of the monitor.
Page 71
p Stores the current monitor angle as the angle during power off. q Returns to the "SETUP Menu" screen. w Returns to the "Tilt Control" screen. e Moves to the "Mode Select 2" screen. r Selects a screen mode of the iPod VIDEO playback screen.
• If you have already completed the code registration, you cannot touch [Set]. Enter a security Code Input four-digit number. DNX7220 Register your security code Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation.
If you have pressed the Reset button or if you have disconnected the Receiver from battery... Enter the correct security code You must enter the same security code as that you have entered in Step 3. Enter the security code Now, you can use your Receiver.
7 Returns to the "RDS SETUP 1" screen. 8 Selects a display language for the PTY function. 9 Returns to the "SETUP Menu" screen. DNX7220 iPod Setup Performs setup when using iPod. Display the iPod SETUP screen in the "SETUP Touch Menu"...
Bluetooth Setup Registers and selects Bluetooth unit. Display the Bluetooth Setup screen Touch in the "SETUP Menu" screen (page 60). Setup each item 1 Sets cell-phone for Hands Free and Audio player for Bluetooth Audio. 2 Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side.
• If the error message appears even though the PIN code is correct, try <Registering Special Bluetooth Unit> (page 77). DNX7220 Registering Bluetooth Unit PIN Code Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side.
Registering Special Bluetooth Unit Registers Special Bluetooth unit that results in error by normal operation by selecting from model name. Display the Special Device List screen Select a model name 1 Displays the Bluetooth unit name that can be registered. 2 Scrolls the name of the Bluetooth unit.
Display the Connect Device List screen Select a Bluetooth unit to delete Delete the Bluetooth unit Confirm deleting of Bluetooth unit DNX7220 DivX Setup Checks the registration code. This code is needed when making a disc which has DRM (Digital Rights Management).
Setup Memory Audio Setup and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. Display the SETUP Memory screen Touch Setup Memory Menu"...
Outputs 500ms when "1" is set. Increases by 200ms with each step. Up to 100 steps can be set. 4 Returns to the original screen. DNX7220 Setting EXT SW Control 2 (EXT SW2) in the "SETUP The setup method is the same as "EXT SW1".
Press several times until the control screen appears. Display the Audio Control menu Select the Audio Control item 1 Switches to the selected Audio Control screen. DNX7220 Audio Control You can adjust the front/rear and right/left audio balance. Display Audio Control screen Touch Control Menu"...
p Adjusts the subwoofer volume. q Returns to the "Audio Control Menu" screen. ⁄ • If you have increased the volume first, then reduced the volume using the "Vol. Offset", the sound generated if you suddenly switch to another source may be extremely loud.
If turned "On", it extends the bass center frequency to the low register by approximately 20%. 9 Returns to the "Equalizer" screen. DNX7220 Zone Control You can set the front and rear audio source. Display Zone Control Touch Control Menu" screen (page 82).
Page 85
⁄ • There are following limitations when zone function is set to "On". - There is no output from the subwoofer. - <Audio Setup> (page 60) and <Equalizer Control> (page 83) are not available. English...
In such instances, replace the both batteries with new ones. DNX7220 Remote Controller mode switch The functions operated from the remote controller differ depending on the position of the mode switch.
Common operations (AUD mode) Source switching Switches to the source to be played. DISP V.SEL ZOOM MENU POSITION • • ENTER • Volume control Adjusts the volume. VIEW MAP DIR ANGLE FM + ZOOM AM− 2 ZONE Volume attenuator Press the key once to lower the volume. Press again to restore the previous volume.
Title number Chapter number Play time Item number* Cancel * You may not be able to use this function with some discs or scenes. DNX7220 Track number Play time Cancel Audio files Folder number File number Cancel VCD 1.X, VCD 2.X (PBC OFF)
DVD Menu Displays the DVD menu. Turns the playback control on or off while playing VCD. • ENTER • • NAVI AUDIO RETURN MODE/TOP MENU FNC/MENU/PBC ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR ANGLE FM + SUBTITLE Switches the subtitle language.
SUBTITLE VIEW MAP DIR ANGLE POSITION Displays the current position. DISP V.SEL ZOOM MENU POSITION • • ENTER • DNX7220 ROUTEM Displays Route Option menu. • ENTER • • NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ROUTEM VOICE CANCEL AV OUT...
TV (TV mode) Switching Band/Video It switches between the station of the TV band to receive and video input. ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR ANGLE FM + ZOOM AM− 2 ZONE Channel Selection The TV channel to receive is selected. VIEW MAP DIR ANGLE...
Fiji Faroese French Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hebrew Hindi Croatian Hungarian Armenian Interlingua Interlingue Inupiak Indonesian DNX7220 Code Language Icelandic Italian Japanese Javanese Georgian Kazakh Greenlandic Cambodian Kannada Korean Kashmiri Kurdish Kirghiz Latin Luxembourgish Lingala Laotian...
• Cannot set up the crossover network. The Dual zone function is enabled. Control> (page 84) DNX7220 What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems.
Mecha Error : The disc player is malfunctioning. ➡ Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error : An unplayable disc is inserted.
Disc Format : DVD-Video/ VIDEO-CD/ CD-DA Sampling Frequency : 44.1/ 48/ 96 kHz Quantifying Bit Number : 16/ 20/ 24 bit DNX7220 USB interface section USB Standard : USB 1.1/ 2.0 File Sytem : FAT 16/ 32 Maximum Power Supply Current...
Page 97
Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or may light incorrectly. Navigation section Receiver : High-sensitivity GPS receiver Reception Frequency : 1575.42 MHz (C/A code) Acquisition Times Cold : <...
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners.
Page 99
The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems) Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste byproducts.