System Setup - Kenwood DNX7280BT Instruction Manual

System Setup

NOTE
• Each operation in this section can be started from
the multi function menu.
1
Touch [Menu] on any screen.
TOP Menu screen appears.
2
Touch [SETUP].
3
Touch [System].
System Menu screen appears.
See the following section for each setting.
• Set up the user interface
• Adjust touch panel (P.69)
• Set up security (P.69)
• Set up external switch
• Set up memory (P.70)
(P.67)
(P.70)
User interface
You can setup user interface parameters.
1
Touch [User Interface] in the list.
User Interface screen appears.
2
Set each item as follows.
Beep
Turns the key touch tone on or off.
Default is "ON".
Remote Sensor*
Selects a remote control signal. Default is "ON".
Language
Select the language used for the control
screen and setting items. See Language setup
(P.68).
Text scroll
Allows scrolling of text display on the source
control screen. Select from "Auto"/"Once"/"OFF".
Auto (Default): S crolls the text automatically.
Once: A llows you to scroll the text only once
automatically when updated.
OFF: Does not scroll the text automatically.
* W hen turned off "Remote Sensor", the
remote control of TV reception is rejected.
Return to the Top page
Setting Up
Continued
67