Samsung DIGIMAX A403 User Manual page 47

• You can use the USB cable to connect this camera to a printer that supports
PictBridge (sold separately) and print the stored images directly. Movie clips and
voice files cannot be printed.
• Connecting the Camera to a Printer
1. Slide the power switch to turn the camera power on.
2. Use the supplied USB cable to connect the camera
to the printer as shown below.
3. Turn on the printer to connect the camera to the
phnter.
4. A window for selecting an external device will
display on the LCD monitor.
5. Select[PRINTER] menu by pressing the Up/Down buttonand press the OK
button.
st tf you selected [COMPUTER] in Step 5, when you connect the camera to your
printer,the [CONNECTING COMPUTER] message wilt display and the
connection will not be established. In this case, disconnect the USB cable, and
then follow the procedure from Step 2 and onward.
• Select pictures to print
1. Usethe LEFT and RIGHT buttonsto select the
[IMAGE] menu tab.
2. Usethe UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button.
When [ONE PtC] is selected
:The PictBridgefunction will be applied only to
the picture currently displayed.
When [ALL PICS] is selected
:The PictBridgefunction will be applied to all pictures, excluding movie clips
and voice files.
• Setting the Number of Copies to Print
- Select [ONE PtC] or [ALL PtCS]. A screen where you can set the number of
copies to print will appear as shown below.
[ When [ONE PIC] is selected ]
[ When [ALL PICS] is selected ]
- Press the Up/Down button to select the number of prints. Maximum 30 prints.
- When you select [ONE PIC] menu, usethe Left/Right button to select another
picture and select the number of prints for another picture.
- After settingthe number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of
prints.
{46}