Samsung Digimax A4 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Digital Camera
  5. Digimax A4
  6. User manual

Samsung Digimax A4 User Manual

Samsung digital camera user manual
Hide thumbs Also See for Digimax A4:
Table of Contents

Advertisement

Quick Links

ENGLISH
User's Manual
Thank you for buying a Samsung Camera.
This manual will guide you through using the camera, including capturing images, downloading images and
using the software applications. Please read this manual carefully before using your new camera.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Digimax A4 and is the answer not in the manual?

Questions and answers

Related Manuals for Samsung Digimax A4

Summary of Contents for Samsung Digimax A4

  • Page 1 ENGLISH User's Manual Thank you for buying a Samsung Camera. This manual will guide you through using the camera, including capturing images, downloading images and using the software applications. Please read this manual carefully before using your new camera.

  • Page 2: Take A Picture

    Instructions Use this camera in the following order Set up the camera driver Take a picture Insert the USB cable Check the camera’s power Check [Removable Disk] If you use a card reader to copy the images on the memory card to your PC, the images could be damaged.

  • Page 3: Table Of Contents

    Contents READY Getting to know your camera About the icons Danger Warning Caution An FCC warning System chart Identification of features Front & Top Back & Bottom Side / 5-function button Mode switch Connecting to a Power Source Using the AC power adapter (3.3V 2.0A) Using the batteries Instructions on how to use the...
  • Page 4 Contents LCD monitor indicator Using the camera buttons to adjust the camera Thumbnail / Enlargement button Voice memo / Up button Play & Pause / Down button LEFT/ RIGHT/ MENU/ OK button LCD button Delete button Setting up the play back function using the LCD monitor Starting the slide show Resize...

  • Page 5: Getting To Know Your Camera

    Please check that the camera is operating properly prior to when you intend to use it (e.g. for a trip or an important event) to avoid disappointment. Samsung camera takes no responsibility for any loss or damages that may result from camera malfunction.

  • Page 6: Danger

    Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service Centre. Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion.

  • Page 7: Caution

    Increase distance between the camera and the affected device. Use a different socket away from the affected device. Please contact a Samsung agent or a radio/TV engineer. This device complies with part 15 of the FCC Rules. Changes or modifications not expressly approved by the party responsible for...

  • Page 8: System Chart

    System chart Please check that you have the correct contents before using this product. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Pouch(Option) Product warranty DPOF compatible SD memory card printer(see p.58) AC cord <...
  • Page 9 System chart Computer PictBridge compatible (see p.94) printer(see p.62) USB cable System Requirements For Windows PC with processor better than MMX Pentium 233MHz (XP : Pentium II 300MHz) Windows 98/ 98SE/ 2000/ ME/ XP Minimum 32MB RAM (XP : 128MB) 140MB of available hard-disk space USB port CD-ROM drive...

  • Page 10: Identification Of Features

    Identification of features Front & Top Mode switch Shutter button Flash Back & Bottom Camera status lamp LCD monitor +/-, DELETE button LCD button Play mode button DC input connection port Tripod socket Power button Speaker Self-timer lamp Lens Microphone Zoom W button (Thumbnail) Zoom T button...

  • Page 11: Side / 5-Function Button

    Battery chamber cover Mode switch You can select the desired working mode by using the mode switch located on the top of the camera. This digital camera has 3 recording modes. These are listed below. Movie clip mode Voice recording mode...
  • Page 12 Identification of features Still image mode Self-timer lamp Icon Status Blinking For the 2 second self timer, the lamp blinks quickly at 0.25-second intervals. For the first 7 seconds, the lamp blinks at 1 second intervals. Blinking For the final 3 seconds, the lamp blinks quickly at 0.25-second intervals. A picture will be taken after about 10 seconds and 2 seconds later a Blinking second picture will be taken.

  • Page 13: Connecting To A Power Source

    There are two ways in which to provide the camera with power. You can use batteries or alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A). We recommend using batteries for a digital camera (Within a year from the date of manufacture). The batteries are listed below.

  • Page 14: Using The Batteries

    Connecting to a Power Source DANGER Always turn off the power before taking the AC adapter out of the mains supply. As with all mains powered devices, safety is important. Ensure that neither the camera nor adapter comes into contact with water or metallic materials. Please ensure that you use an AC adapter (3.3V 2.0A) with the correct specification for the camera.

  • Page 15: Instructions On How To Use The

    Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty. The memory card is an electronic precision device.
  • Page 16 Instructions on how to use the memory card INFORMATION If you open the battery chamber cover when the camera power is turned on, the power will turn off automatically. Don’t remove the memory card when the camera status lamp(Green) is blinking as this may cause damage to data in the memory card.

  • Page 17: Inserting The Memory Card

    Inserting the memory card 1. Turn off the camera’s power and pull the battery chamber cover in the direction of the arrow to open. 2. Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor), and then push the memory card into the card slot until you hear a click.

  • Page 18: Lcd Monitor Indicator

    LCD monitor indicator The LCD monitor displays information about the shooting functions and selections. Description Battery Recording mode Flash Self-timer Macro Metering Memory in use indicator Auto focus frame Camera shake warning Date/ Time Exposure compensation White Balance [ Image & Full Status ] Icons 2004/12/01 01:00 PM Page...

  • Page 19: Starting The Recording Mode

    LCD monitor indicator Sharpness Image quality Image size Number of available shots remaining Remaining time (Movie clip/ Voice recording) Voice memo Optical zoom/ Digital zoom rate Starting the recording mode If the memory card is inserted in the camera, all the camera functions apply only to the memory card.

  • Page 20: Pausing While Recording A Movie Clip

    Starting the recording mode Pausing while recording a movie clip (Successive Recording) This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favorite scenes into a movie clip without having to create multiple movie clips.

  • Page 21: Recording A Still Image

    Starting the recording mode Recording a still image Steps from 1-4 are the same as those for recording a movie clip. 5. Select the STILL IMAGE( mode switch. 6. Point the camera towards the subject and compose the image by using the LCD monitor. 7.

  • Page 22: Things To Watch Out For When Taking Pictures

    Things to Watch Out for When Taking Pictures Pressing the shutter button down half way Lightly press the shutter button to confirm focus. Press the shutter button all way down to take the picture. [ Lightly press the shutter button ] The available recording time may vary depending on shooting conditions and camera settings.

  • Page 23: Using The Camera Buttons To Adjust The Camera

    Using the camera buttons to adjust the camera The RECORDING mode function can be set up by using the camera buttons. POWER button Used for turning the camera’s power on / off. To turn on the camera power, press the power button. If there is no operation during the specified time, the camera’s power will be turned off automatically to save battery life.
  • Page 24 ZOOM W/ T button This camera has a 3X optical zoom and a 4X digital zoom function. Using both will offer a total zoom ratio of 12X. If you press the macro button, the zoom will be fixed as the wide zoom and the zoom rate bar will disappear.
  • Page 25 ZOOM W/ T button INFORMATION Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. The digital zoom cannot be used in movie clip shots. You may notice a decrease in image quality when using the digital zoom. If the movie clip is being recorded, the zoom operation cannot be activated.

  • Page 26: Voice Memo / Up Button

    Voice memo( 3. Press the shutter button and take a picture. The picture is stored on the memory. 4. Voice memo will be recorded for ten seconds from the moment the picture is stored. In the middle of the sound recording, pressing the shutter button will stop the voice memo. INFORMATION A distance of 40cm between you and the camera (microphone) is the best distance to record sound.

  • Page 27: Focus Lock

    Macro( ) / Down button (Focusing) Available focusing method, by recording mode ( O : Selectable , X : Not selectable, Mode Auto Macro Mode Auto Macro Focus lock To focus on the subject positioned outside of the centre, use the focus lock function. Using the Focus Lock 1.

  • Page 28: Flash / Left Button

    Flash( ) / Left button When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH( ) button.

  • Page 29: Left Button

    Flash( ) / Left button Flash mode indicator Icon Flash mode Auto flash Auto & Red eye reduction Fill in flash Slow synchro Flash off Available flash mode, by recording mode Description If the subject or background is dark, the camera flash will operate automatically.

  • Page 30: Self-Timer / Right Button

    Self-timer( When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Selftimer( ) button. This function is used when the photographer would also like to be in the image.

  • Page 31: Menu/ Ok Button

    MENU/ OK button MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : MOVIE CLIP and STILL IMAGE mode.

  • Page 32: Button

    +/- button You can use the +/- button to adjust the values for the white balance, ISO and exposure compensation. Main menu AUTO, DAYLIGHT, CLOUDY, FLUORESCENT H, WHITE BALANCE FLUORESCENT L, TUNGSTEN, CUSTOM. Exposure compensation White balance : The white balance control allows you to adjust the colours to appear more natural looking.
  • Page 33 +/- button Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. 1. Select the CUSTOM ( Balance and press the OK button.
  • Page 34 +/- button Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the +/- button. Compensating Exposure 1. Press the +/- button, and then use the UP and DOWN buttons to select the exposure compensation icon ( The exposure compensation menu bar will appear as shown.

  • Page 35: Lcd Button

    LCD button You can check the recording status in the LCD monitor. Pressing the LCD button in the RECORDING (STILL IMAGE, MOVIE CLIP) mode will change the display as shown below. Pressing the LCD button [ Image & full information ] [ Image &...

  • Page 36: Settings

    Using the LCD monitor to adjust the camera settings You can use the menu on the LCD monitor to set up recording functions. In any mode with the exception of VOICE RECORDING mode, pressing the MENU button displays the menu on the LCD monitor.

  • Page 37: How To Use The Menu

    Using the LCD monitor to adjust the camera settings Menu tab Main menu METERING EFFECT SHARPNESS MYSET * Menus are subject to change without prior notice. How to use the menu 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is no menu for Voice Recording mode ( 2.

  • Page 38: Mode

    Mode You can select the desired Still Image mode. AUTO : Use this for shooting basic still images. PROGRAM : Selecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed.

  • Page 39: Size

    Size You can select the image size appropriate for your application. STILL IMAGE mode Mode Icon 2272 2048 Size 2272X1704 2048X1536 1600X1200 1024X768 640X480 640X480 320X240 160X120 2048 SIZE 2272X1704 2048X1536 1600X1200 1024X768 [ STILL IMAGE mode ] INFORMATION The higher the resolution, the lower the number of available shots will be because high resolution images require more memory than lower resolution images.

  • Page 40: Quality

    Quality You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. Mode Icon Sub menu S.FINE File Format jpeg 2272 2048 QUALITY S.FINE FINE NORMAL [ STILL IMAGE mode ] INFORMATION S.FINE is the highest quality and NORMAL is the lowest setting.

  • Page 41: Metering

    Metering If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. MULTI ( : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area.

  • Page 42: Sharpness

    Sharpness You can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. Sub menu Icon SOFT...

  • Page 43: Myset

    Save / Load the camera configuration (MYSET) Use the MYSET mode to save frequently used camera settings (SAVE) and use it later (LOAD) Saving the camera configuration : Available in the PROGRAM mode. 1. Press the MENU button and select [MYSET] menu by pressing the LEFT/RIGHT button.

  • Page 44: Starting Play Mode

    Starting play mode If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory.

  • Page 45: Playing Back A Movie Clip

    Starting play mode Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip that you want to play back by using the LEFT/RIGHT button. If you select a movie clip, the movie clip indicator ( displayed on the LCD monitor.

  • Page 46: Lcd Monitor Indicator

    LCD monitor indicator The LCD monitor displays information about the shooting conditions. Description Battery Play mode File Type Voice memo Protect indicator DPOF indicator Stored image number If you press the LCD button, you can check the following recording information: SIZE: 2272X1704 AV: F2.9 TV: 3s...

  • Page 47: Using The Camera Buttons To Adjust The Camera

    Using the camera buttons to adjust the camera In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Thumbnail( You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image.
  • Page 48 Thumbnail( The maximum enlargement rate in proportion to the image size. Image size 2272 Maximum enlargement rate X5.0 Trimming : You can extract part of the image that you want and save it separately. 1. Select an image that you want to enlarge and press the enlargement button.

  • Page 49: Voice Memo / Up Button

    Voice ( ) memo / Up button 3. Press the shutter button to start recording and voice will be recorded to the still image for 10 seconds. While the voice is recording, the recording status window will be displayed as shown alongside. 4.

  • Page 50: Left/ Right/ Menu/ Ok Button

    LEFT/ RIGHT/ MENU/ OK button LEFT / RIGHT/ MENU/ OK buttons activate the following. - LEFT button : While the menu is showing, press the LEFT button to select the menu tab to the left of the cursor. - RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab to the right of the cursor, or to move an secondary menu.

  • Page 51: Delete Button

    Delete( ) button This deletes images stored on the memory card. Deleting Images in Play Mode 1. Select an image that you want to delete by pressing the LEFT / RIGHT button and press the DELETE( button. 2. A message will display as shown alongside on the LCD monitor.

  • Page 52: Lcd Monitor

    Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows.

  • Page 53: Setting Up The Play Back Function Using The Lcd Monitor

    Setting up the play back function using the LCD monitor This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Menu tab Main menu IMAGES PRINT DPOF PRINT AUTO SET...
  • Page 54 Setting up the play back function using the LCD monitor Menu tab Main menu CUSTOM SET RESET Menus are subject to change without prior notice. Sub menu Secondary menu AUTO PLAIN TYPE PHOTO FAST PHO. AUTO DRAFT QUALITY NORMAL FINE AUTO DATE AUTO...

  • Page 55: Starting The Slide Show

    Starting the slide show Images can be displayed continuously at pre-set intervals. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [SLIDE] menu tab. Setting play interval : Set the slide show play interval. 1.

  • Page 56: Resize

    Resize Change the resolution (size) of pictures taken. Select [LOGO] to save an image to be the start-up image. The resized image will have a new file name. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [RESIZE] menu tab.

  • Page 57: Protecting Images

    Protecting images This is used to protect specific shots from being accidentally erased (LOCK). It also unprotects images that have been previously protected (UNLOCK). Protecting Images 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [PROTECT] menu tab.

  • Page 58: Deleting All Images

    Deleting all images Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card.

  • Page 59: Dpof : Standard

    DPOF : STANDARD This function allows you to embed print quantity information on a stored image. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [STANDARD] menu by pressing the UP/ DOWN button and press the RIGHT button.

  • Page 60: Dpof : Print Size

    DPOF : PRINT SIZE You can specify the print size when printing images stored on the memory card. The [SIZE] menu is available only for DPOF 1.1 compatible printers. Setting the Print Size 1. Press the play mode button and press the menu button. 2.

  • Page 61: Copy To Card

    COPY TO CARD This enables you to copy image files to the memory card. Copying to the Memory Card 1. Press the play mode button and press the menu button. 2. Select the [COPY TO CARD] menu tab by pressing the LEFT/ RIGHT button.

  • Page 62: Pictbridge

    PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. You can set up the following settings from the PictBridge menu. IMAGES PRINTER SETUP PRINT...

  • Page 63: Pictbridge : Picture Selection

    PictBridge : Picture Selection Select pictures to print 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer. (See p.62) 2. The [IMAGES] menu will appear. 3. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button.

  • Page 64: Pictbridge : Printing

    PictBridge : Printing Printing Pictures 1. Connect the camera to your printer. The [USB] menu must be set to [PRINTER] before you connect the camera to the printer. (See p.62) 2. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab.

  • Page 65: Pictbridge : Print Setting

    PictBridge : Print Setting AUTO SET 1. Connect the camera to your printer. The [USB] menu must be set to [PRINTER] before you connect the camera to the printer. (See p.62) 2. Use the LEFT and RIGHT buttons to select the [AUTO SET] menu tab.

  • Page 66: Pictbridge : Reset

    PictBridge : RESET Initialises user-changed configurations. 1. Connect the camera to your printer. The [USB] menu must be set to [PRINTER] before you connect the camera to the printer. (See p.62) 2. Use the LEFT and RIGHT buttons to select the [RESET] menu tab.

  • Page 67: Setup Menu

    Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by Menu tab Main menu FILE PWR SAVE LANGUAGE FORMAT DATE&TIME DATE TYPE IMPRINT SOUND are default settings.

  • Page 68: File Name

    Setup menu Menu tab Main menu Q.VIEW RESET * Menus are subject to change without prior notice. File name This function allows the user to select the file naming format. Assigning File Names 1. In any mode with the exception of Voice Recording mode, press the MENU button.

  • Page 69: Auto Power Off

    File name INFORMATION The first stored folder name is 100SSCAM, and the first file name is STA40001. File names are assigned sequentially from STA40001 The files used with the memory card conform to the DCF(Design rule for Camera File systems) format. Auto power off This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage.

  • Page 70: Language

    Language There is a choice of languages that can be displayed on the LCD monitor. Even if the batteries or AC adapter are removed and inserted again, the language setting will be preserved. Setting Language 1. In any mode with the exception of Voice Recording mode, press the MENU button.

  • Page 71: Formatting A Memory Card

    Formatting a memory card This is used for formatting the memory card. If you run [FORMAT] on the memory card, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory card. If the memory card is not inserted, the internal memory will be formatted.

  • Page 72: Setting Up The Date/ Time

    Setting up the Date/ Time You can change the date and time that will be displayed on the captured images. Setting Date/Time 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab.

  • Page 73: Imprinting The Recording Date

    Imprinting the recording date There is an option to include DATE/TIME on still images. Date Imprinting 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab.

  • Page 74: Selecting An External Device (Usb)

    Selecting an External Device (USB) You can select an external device to which you want to connect the camera using the USB cable. Selecting an External Device 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2.

  • Page 75: Quick View

    Quick view If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is possible only with still images. Setting Quick View 1.

  • Page 76: Setting Up The Mycam Menu

    Setting up the MYCAM menu You can set up a start up image, start up sound and shutter sound. Every camera working mode (with the exception of Voice recording mode) has the MyCAM menu. The items indicated by Menu tab Main menu S.IMAGE SH.SOUND...

  • Page 77: Shutter Sound

    Shutter sound You can select the shutter sound. Selecting the Shutter Sound 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [MYCAM] menu tab. 3. Select the [SH.SOUND] menu by pressing the UP/ DOWN button and press the RIGHT button.

  • Page 78: Important Notes

    - Pay attention not to get fingerprints or foreign substances on the surface of the lens. If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the batteries and the memory card if you do not intend using the...
  • Page 79 Important notes If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card. Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used.

  • Page 80: Warning Indicator

    Warning indicator There are several warnings that may appear on the LCD display Warning indicator - Memory card error CARD ERROR ! - There is insufficient memory CARD FULL ! capacity to take an image - There are no images stored NO IMAGE ! on the memory card - File error...

  • Page 81: Before Contacting A Service Centre

    Before contacting a service centre Please check the following Symptom - There is low battery capacity - An AC Power Adapter is not connected The camera doesn t - Batteries are inserted switch on incorrectly with the reverse polarities - The batteries are exhausted - The Camera is turned off The camera power automatically...
  • Page 82 Before contacting a service centre Symptom - A picture was taken within 0.8 m from the subject without setting an appropriate macro The images are mode unclear - Taking a picture beyond the flash range - The lens is smudged or dirty The flash does not - Flash off mode has been fire...
  • Page 83 Before contacting a service centre Symptom Colour of image is - White balance setting is different to the incorrect original scene Images are too - Exposure is excessive bright - Cable connection is incorrect - The camera is off - There are no batteries, the batteries are exhausted or the When using the AC adapter is not connected.

  • Page 84: Specifications

    Specifications Type Image Sensor Effective Pixel Total Pixel Focal Length Lens F No. Digital Zoom LCD Monitor Type Focusing Range Type Shutter Speed Control Exposure Compensation ISO Equivalent Modes Range Flash Recharging Time Sharpness Effect White Balance Voice Recording Date Imprinting Still Image Shooting Movie Clip...

  • Page 85: Software

    DC power input connector : 3.3V Primary Batteries : 2 x AA alkaline, or CR-V3(Lithium) battery Secondary Batteries : 2 x Ni-MH, Samsung SBP-1303(Lithium Ion) AC Adapter(optional) : SAC-32 (DC 3.3V, 2A) * Included battery may vary depending on sales region.

  • Page 86: Software Notes

    Using a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer is not covered by the Samsung warranty. Before reading this manual, you should have a basic knowledge of computers and O/S (Operating Systems).

  • Page 87: About The Software

    You should allow 5 ~ 10 seconds for running the automatic setup program according to the capability of the computer. If the frame does not show, run the [Windows Explorer] and select [Samsung.exe] in the CD-ROM Drive root directory. Before connecting the camera to the PC, you should first install the camera driver.

  • Page 88: Setting Up The Application Software

    INFORMATION Close other programs before installing the application software. Before installing the application software, disconnect the USB connection. You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.kr : Korean 1. Click the [Install] menu in the Autorun frame.
  • Page 89 Setting up the application software 3. A window for which you can select application software will be displayed. Select the application program and click the [Install] button. Refer to page 87 for more information about the application program. INFORMATION If you select [Exit] at the step 3, the application program installation will be cancelled. 4.
  • Page 90 Setting up the application software 7. A window will open, asking you to choose a folder to which program icons will be added. Click [Next >] button. If you want to add the program icons to a different folder, choose another folder, and then click [Next >] button.
  • Page 91 Setting up the application software 11. The Software License Agreement window will be displayed. If you agree to this, click [Yes], the window will then move to the next step. If you disagree, click [No] and the installation program will be cancelled. 12.
  • Page 92 Setting up the application software 15. Installation is complete. To apply changes, you must restart the computer. Select [Yes, I want to restart my computer now], and then click [OK]. * The frame 15 may be displayed according to the system requirements.
  • Page 93 2. Refer to FAQ (p.103) to check for a possible solution to the problem. 3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host Controller), download the patch file from the Samsung Camera web page. (http://www.samsungcamera.com)

  • Page 94: Starting Pc Mode

    Starting PC mode If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". In this mode, you can download stored images to your PC through the USB cable. The LCD monitor is always turned off in PC mode.
  • Page 95 Starting PC Mode Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2.
  • Page 96 Starting PC Mode 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. - By using [Digimax Viewer], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files.

  • Page 97: Removing The Usb Driver For Windows 98Se

    1. Trace [Start → Settings] and click [Control Panel]. 2. Double-click [Add/Remove programs]. 3. The [Add/Remove Programs Properties] window will open. Click [Digimax A4] and click the [Add/Remove] button. 4. Uninstallation is complete. Click the [Finish] button and the window will disappear.

  • Page 98: Removable Disk

    Removable Disk To use this camera as a Removable Disk, install (p.88) the USB Driver. 1. Before turning the camera power on, connect the camera to the PC with the USB cable. 2. Click [Removable Disk] under [My computer] or [Windows Explorer]. 3.

  • Page 99: Removing The Removable Disk

    Removing the removable disk Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, you have to wait until the lamp illuminates. 2. Unplug the USB cable. Windows 2000/ME/XP (The illustrations may be different from the real display in accordance with the Windows O/S.) 1.

  • Page 100: Setting Up The Usb Driver For Mac

    Removing the removable disk 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 7. Unplug the USB cable. Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver.

  • Page 101: Digimax Viewer 2.1

    Digimax Viewer 2.1 This software is only compatible with Windows. 1. To open Digimax Viewer, click the [Start → Programs → Samsung → Digimax Viewer 2.1 → Digimax Viewer 2.1 ] and Digimax Viewer 2.1 will then open. 2. If the [Auto Launch] option is selected, this program will be executed automatically by recognising the camera.

  • Page 102: Using Photoimpression

    Using PhotoImpression With PhotoImpression, you can edit or store still images that you downloaded from the camera. This software is only available in Windows version. To start the program, click [Start → Programs → ArcSoft PhotoImpression → PhotoImpression]. The following screen will appear. [ Command Button ] You can use PhotoImpression to perform the following tasks.

  • Page 103: Faq

    Using PhotoImpression Tool Bar Button Description Resize Layer Flip Layer Horizontally Undo Copy Delete Layer INFORMATION For detailed instructions on how to use PhotoImpression, please refer to the program's Help. Please check the following if the USB connection malfunctions. [Case 1] The camera power is off.
  • Page 104 [Case 4] The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. → Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera.
  • Page 105 [Case 9] When I open the Device Manager (by clicking Start → (Settings) → Control Panel → (Performance and Maintenance) → System → (Hardware) → Device Manager), there are yellow question mark(?) beside them or devices with an exclamation mark(!) beside them.
  • Page 106 → Click the [OK] button. Most problems will be solved with those remedies. If the movie clip doesn't play back continuously, install the JPEGCODE provided with the camera again. For more information, visit the samsung website(www.samsungcamera.com) and see the FAQ page.
  • Page 107 MEMO...
  • Page 108 SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086,8088, 8090, 8092, 8099 FAX : (82) 31-740-8398, 8111 www.samsungcamera.com SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A.

Table of Contents

Save PDF