Samsung DIGIMAX A403 User Manual page 42

R Images can be displayed continuously at p re-set intervals. You can view the
slide show by c onnecting the c amera to an external monitor.
1. P ress the p lay mode button and press the m enu button.
2. P ress the L EFT
/ RIGHT button and salect the [SLIDE] menu tab.
• Start the sfide show :The slide show can start only in the [SHOW] menu.
1. Use the Up/Down buttonsto select the [SHOW]
menu and press the Right button.
2. Select a desired sub menu by pressingthe Up/
Down button.
[PLAY] : The slide show is closed after one
cycle.
[REPEA_] : The slide show is repeated until
cancelled.
3. Press the OK button to start the slide show.
- Press the Pause button to pause the slide show.
- Press the Pause button ( _ ) againto resume the slide show.
- To stop the slide show, press the Pause button and then press LEFT/
RIGHT button.
• Setting play interval: Set the slide show play interval
1. Use the Up/Down buttons to salect the
[INTERVAL] menu and press the Right button.
2. Use the Up/Down buttons to select the desired
interval.
3. Press the OK button to save the configuration.
• Configure slide show effects :Unique screen effectscan beused for the slide show.
1. Select the [EFFECT] sub menu by pressingthe
UP / DOWN button and press the RIGHT button.
2. Use the Up/ Down button to select the type of
effect.
[OFF] : Normal display.
[El] : Image is displayed slowly from the left.
[E2] : Image is displayed slowly from the centre
outwards.
[E3] : Image moves from the top left.
[E4] :The image slides diagonally from top left to bottom right.
[MIX] :The image slides irregularly.
3. Press the OK button to confirm the setting.
(41}