Yamaha RX-V673 Owner's Manual page 41

When the measurements at the positions you want
to measure are completed, use the cursor keys to
select "CANCEL" and press ENTER,
When you have taken measurements at 8 listening
positions, the following screen appears automatically.
6 Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
Cautior'_
• The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).
ENTER
• To check the measurement results, select "Result". For details, see
"Checking the measurement results" (p.41).
Use the cursor keys to select "Save/Cancer' and
press ENTER.
To save the measurement result, use the cursor
keys to select "SAVE" and press ENTER.
Checking the measurement results
You can check the YPAO measurement results.
After the measurement, use the cursor keys to
select "Result" and press ENTER.
• You can also select "Result" from "Auto Setup" (p.89) in the "Setup" menu,
whichdisplaysthe previousmeasurementresults.
The following screen appears.
The adjusted speaker settings are applied.
@ Measurement result items
@ Measurement result details
@ The number of measured positions (when multi
measure is performed) * RX-V773 only
• To finish the measurement without saving the result, select "CANCEL".
PREPARATIONS • Optimizing the speaker settings automatically (YPAO) En 41