Yamaha RX-V673 Owner's Manual page 27

Connection Method 4 (TV without HDMI input jacks)
When connecting any video device to the AV 1-2 (COMPONENT VIDEO) jacks of the
unit, connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks.
When connecting any video device to the AV 3-6 (VIDEO) jacks or the front VIDEO jack
of the unit, connect the TV to the MONITOR OUT (VIDEO) jack.
If you select "AV 4" as the input source by pressing AV 4 or SCENE(TV), the TV audio
will be played back on the unit.
• If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be
output to the TV.
• Operations with TV screen are available only when your TV is connected to the unit via HDMI.
• If you have connected any external device to the AV 4 jacks or if you want to use another input jack (other
than OPTICAL) for connecting the TV, connect the TV to one of the AV 1-6 and AUDIO 1-2 jacks. To use
the SCENE function (p.46), you also need to change the input assignment for SCENE(TV).
_] COMPONENT VIDEO connection (with a component video cable)
The unit (rear)
MONITOR OUT
(COMPONENT VIDEO)
jacks
Video input
(component video)
rCOMPONENT
VIDEO
ii®
AV 4 (OPTICAL) jack
TV
Audio output
(digital optical)
FI VIDEO (composite video) connection (with a video pin cable)
MONITOR OUT
The unit (rear) (VIDEO) jack
Video input
(composite video)
v
AV 4 (OPTICAL) jack
TV
Audio output
(digital optical)
Connecting another TV or a projector
(RX-V773 only)
The unit has two HDMI output jacks. If you connect another TV or a projector to the unit
with an HDMI cable, you can switch the TV (or projector) to be used for watching
videos with the remote control (p.45).
HDMI OUT 2 jack
The unit TV
(rear)
HDMI input
TV (already connected)
• HDMI Control is not available on the HDMI OUT 2 jack.
Projector
PREPARATIONS • Connecting a TV En 27