GE 13V110TD User Manual page 9

Connections & Setup Chapter 1
CABLE OR
TV/DVD
OUT
R L
u_
CZA]
i
0 VIDEO S-VIDEO
I I
j DOLBY DIGITAL
or DTS RECEIVER
*OR-
Note: Thebackof your Ddby Digital* or DTS ++ recdver might not look exactly likethe one
shown here.
Dolby DigitaP and DTSe
Both Dolby Digita+ and DTS are audio formats used to record 5.1-ehanne{ audio signals onto the digital
track of film (white the film is being made). Both of these formats provide up to six separate channels:
taft, right, center, left rear, right rear, and common subwoofer.
The disc will play 5.1-channel sound only if you've connected a DIS or Dotby Digital receiver or decoder
and if the original movie the disc was recorded from was encoded in the Dolby Digital or DTS format.
Please Read This Before
Using
the DIGITAL AUDIO OUT Jack!
This unit's digital output jack is designedfor o connection to o Ddby Digital or DTS receiveror deeode_
Older digital equipment may not he tampa due with the Dolby Digital bitstreom.Sucho connection con createo high
levelof noise that may behormf+d to your ears,and could damage headphonesor speakers.
It is importont to choose theeorreczDigital Output setting in the OVDPlayer'sSound menu,especiallywhenyou use
tile DIGITAL A UDIOOUT jack Formoreinformation, see Chapter4.
*Manufactured under license from Do+by Laboratories "Dolby" and the double-D symbol are
trademarks of Do+by Laboratories Confidential unpublished works ©1992-1997 Dolby Laboratories,
Inc All rights reserved
* *DTS is a registered trademark of Digital Home Theater Systems, Inc
Chapter I Graphics contained within this publication are for representation only. 7