Table of Contents
Advertisement
Chapter
2
P|aying
DVDs
Regional
Coding
Boththe W/DVDunit and the discsarecodedby region.These regionalcodesmustmatchin orderfor
the discto play.If the codesdon't match,the discwon't Nay.Thisunit'scodeis region1.
Using
Different
Menus
Eachdisc is programmed with different features. There are three separate menu paths that you can use
to accessfeatures:
The Disc menu - The disc menu is part of each disc and is separate from the DVD's menu system. The
contents of each disc menu vary according to how the disc was authored
and what features are
included. The disc menu is turned on and off (while the disc is playing) with the MENU button
on the
remote.
•
The DVD's Info Display - The Info Display appears as icons across the top of the screen when a disc
is playing. It can only be accessed while you are playing a disc. It's turned on and off with the INFO
button on the remote.
•
The DVD's menu system - The DVD's menu system is accessed only when a disc isn't playing. It
appears automatically
when the STOP button
is pressed.
A feature will only work if the disc was programmed
with that feature. If a menu item is "grayed out" it
means that item isn't available.
Loading
and Playing
Discs
Your W/DVD unit plays DVD discs, Video CD discs, Audio CD discs, MP3 discs and CD-R discs. Before you
load a disc, make sure that it is compatible
with the player. The following
discs CANNOT be used with
this player:
•
Laserdiscs, CD-I, CD-ROM (computer-only
discs], CD-RW, DVD-ROM, Discs recorded using other
broadcast standards (i.e. PAL or SECAM)
This is an example
of a one-sided disc.
This is an example
of a 2-sided disc.
The title is in the
cente_
To Load and Play a Disc
To put the W/DVD in DVD mode and play a disc, pressthe DVD button on the
remote control.
1. Press the OPEN•CLOSE button
on the front of the W/DVD. The disc tray opens.
2. Place a disc gently into the tray with the disc's label facing up (double-sided
discs have content
on both sides, so you can place either side up).
3. Press the OPEN•CLOSE or PLAY button. The disc tray closes.
The lV/DVD reads the disds table of contents,
and then one of three things
happens depending on how the disc was programmed:
•
The disc star ts playing.
•
The disc menu appears on the screen. One of the options will start disc
play. Highlight
that option and press OK on the remote.
• The DVD'smain menu appears on the screen. Highlight the Playoption
and pressOK on the remote.
When you stop playing a disc, the unit remembers where you stopped. When you
start playing the disc again, the unit picks up where you left off unless the disc is
removed, the unit is unplugged,
or you pressed the STOP button
twice.
18
Graphics contained within this publication are for representation only
Chapter
2
Advertisement
Table of Contents
Troubleshooting
